mirror of
https://github.com/openbsd/xenocara.git
synced 2025-12-17 06:39:50 +00:00
Sync with sparc wsmouse changes.
This commit is contained in:
miod
4
Makefile
4
Makefile
@@ -1,4 +1,4 @@
|
|||||||
# $OpenBSD: Makefile,v 1.28 2009/02/02 20:57:55 matthieu Exp $
|
# $OpenBSD: Makefile,v 1.29 2009/05/20 18:26:32 miod Exp $
|
||||||
.include <bsd.own.mk>
|
.include <bsd.own.mk>
|
||||||
|
|
||||||
LOCALAPPD=/usr/local/lib/X11/app-defaults
|
LOCALAPPD=/usr/local/lib/X11/app-defaults
|
||||||
@@ -95,7 +95,7 @@ release-clean:
|
|||||||
release-install:
|
release-install:
|
||||||
@${MAKE} install
|
@${MAKE} install
|
||||||
.if ${MACHINE} == alpha || ${MACHINE} == hp300 || ${MACHINE} == mac68k || \
|
.if ${MACHINE} == alpha || ${MACHINE} == hp300 || ${MACHINE} == mac68k || \
|
||||||
${MACHINE} == macppc || ${MACHINE} == sparc || ${MACHINE} == sgi || \
|
${MACHINE} == macppc || ${MACHINE} == sgi || \
|
||||||
${MACHINE} == vax || ${MACHINE} == zaurus
|
${MACHINE} == vax || ${MACHINE} == zaurus
|
||||||
@if [ -f $(DESTDIR)/etc/X11/xorg.conf ]; then \
|
@if [ -f $(DESTDIR)/etc/X11/xorg.conf ]; then \
|
||||||
echo "Not overwriting existing" $(DESTDIR)/etc/X11/xorg.conf; \
|
echo "Not overwriting existing" $(DESTDIR)/etc/X11/xorg.conf; \
|
||||||
|
|||||||
@@ -3,60 +3,34 @@ Post-installation instructions for X.Org on OpenBSD/sparc
|
|||||||
|
|
||||||
1. Seting up X on sparc is easy:
|
1. Seting up X on sparc is easy:
|
||||||
|
|
||||||
Typical Xorg use on Sun sparc-based machines requires no special
|
Typical Xorg use on Sun sparc-based machines requires no configuration
|
||||||
configuration. The provided /etc/X11/xorg.conf will work in most
|
file.
|
||||||
setups.
|
|
||||||
|
|
||||||
However, multi-headed configurations will require some changes to this
|
However, multi-headed configurations will require a configuration file.
|
||||||
file. Starting from the existing /etc/X11/xorg.conf, three additional
|
Create /etc/X11/xorg.conf, with these two sections for each framebuffer:
|
||||||
sections are added for the second framebuffer:
|
|
||||||
|
|
||||||
Section "Device"
|
Section "Device"
|
||||||
Identifier "Wsdisplay1"
|
Identifier "Wsdisplay0"
|
||||||
Driver "wsfb"
|
Driver "wsfb"
|
||||||
Option "device" "/dev/ttyD0"
|
Option "device" "/dev/ttyC0"
|
||||||
EndSection
|
|
||||||
|
|
||||||
Section "Monitor"
|
|
||||||
Identifier "Monitor1"
|
|
||||||
VendorName "Unknown"
|
|
||||||
ModelName "Unknown"
|
|
||||||
# Adjust those to your monitor before using another device than wsfb
|
|
||||||
# or you can destroy it !!
|
|
||||||
HorizSync 31.5-60
|
|
||||||
VertRefresh 50-70
|
|
||||||
EndSection
|
EndSection
|
||||||
|
|
||||||
Section "Screen"
|
Section "Screen"
|
||||||
Identifier "Screen1"
|
Identifier "Screen0"
|
||||||
Device "Wsdisplay1"
|
Device "Wsdisplay0"
|
||||||
Monitor "Monitor1"
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 1
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 8
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 16
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 24
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 32
|
|
||||||
EndSubSection
|
|
||||||
EndSection
|
EndSection
|
||||||
|
|
||||||
The ServerLayout section is also changed to include the second framebuffer
|
This example is for the first screen. For the others, increment the
|
||||||
and its logical location relative to the first, eg:
|
"Wsdisplay" and "Screen" numbers, and change the device to /dev/ttyD0
|
||||||
|
for the second display, /dev/ttyE0 for the third, and so on.
|
||||||
|
|
||||||
|
Then, you'll need to create a ServerLayout section describing all the
|
||||||
|
displays and their location relative to the first, as in:
|
||||||
|
|
||||||
Section "ServerLayout"
|
Section "ServerLayout"
|
||||||
Identifier "wsfb"
|
Identifier "wsfb"
|
||||||
Screen 0 "Screen0"
|
Screen 0 "Screen0"
|
||||||
Screen 1 "Screen1" RightOf "Screen0"
|
Screen 1 "Screen1" RightOf "Screen0"
|
||||||
InputDevice "zsmouse0" "CorePointer"
|
|
||||||
InputDevice "Keyboard0" "CoreKeyboard"
|
|
||||||
EndSection
|
EndSection
|
||||||
|
|
||||||
See xorg.conf(5) for more options.
|
See xorg.conf(5) for more options.
|
||||||
@@ -64,8 +38,8 @@ Post-installation instructions for X.Org on OpenBSD/sparc
|
|||||||
2. Start either xdm(1) or startx(1).
|
2. Start either xdm(1) or startx(1).
|
||||||
|
|
||||||
a. Start xdm(1), the X display manager by activating the xdm_flags option
|
a. Start xdm(1), the X display manager by activating the xdm_flags option
|
||||||
in /etc/rc.conf(8) or /etc/rc.conf.local(8). You do not need to disable
|
in /etc/rc.conf(8) or /etc/rc.conf.local(8). It is necessary to disable
|
||||||
the console getty.
|
/dev/console in /etc/ttys, change the 'status' of /dev/console to 'off'.
|
||||||
|
|
||||||
b. Start startx(1) from a console shell. It is the X script that starts
|
b. Start startx(1) from a console shell. It is the X script that starts
|
||||||
the X server and a few X applications, including a window manager.
|
the X server and a few X applications, including a window manager.
|
||||||
@@ -73,4 +47,4 @@ Post-installation instructions for X.Org on OpenBSD/sparc
|
|||||||
|
|
||||||
problem_blurb
|
problem_blurb
|
||||||
|
|
||||||
$OpenBSD: README.sparc,v 1.2 2008/08/31 07:33:29 matthieu Exp $
|
$OpenBSD: README.sparc,v 1.3 2009/05/20 18:26:35 miod Exp $
|
||||||
|
|||||||
@@ -11,147 +11,10 @@ Single, unaccelerated display
|
|||||||
-----------------------------
|
-----------------------------
|
||||||
This setup is by far the easiest to configure and is supported on just
|
This setup is by far the easiest to configure and is supported on just
|
||||||
about every machine OpenBSD/sparc64 runs on (both PCI and SBus based
|
about every machine OpenBSD/sparc64 runs on (both PCI and SBus based
|
||||||
machines). A sample /etc/X11/xorg.conf is given at the end of this
|
machines). These setup do not require any configuration file.
|
||||||
section, but it may need to be customized to fit the machine. Mostly
|
|
||||||
these just entails configuring where mouse input comes from.
|
|
||||||
|
|
||||||
- For systems with serial mice on Zilog ports (zstty), the following
|
To use xdm from rc.conf, it is necessary to disable /dev/console in
|
||||||
'ServerLayout' section should be used in place of the one provided:
|
/etc/ttys, change the 'status' of /dev/console to 'off'.
|
||||||
|
|
||||||
Section "ServerLayout"
|
|
||||||
Identifier "wsfb"
|
|
||||||
Screen 0 "Screen0" 0 0
|
|
||||||
InputDevice "zsmouse0" "CorePointer"
|
|
||||||
InputDevice "Keyboard0" "CoreKeyboard"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
- For systems with serial mice on 'com' ports, the following
|
|
||||||
'ServerLayout' section should be used in place of the one provided:
|
|
||||||
|
|
||||||
Section "ServerLayout"
|
|
||||||
Identifier "wsfb"
|
|
||||||
Screen 0 "Screen0" 0 0
|
|
||||||
InputDevice "commouse0" "CorePointer"
|
|
||||||
InputDevice "Keyboard0" "CoreKeyboard"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
- For systems with USB mice or PS/2 mice, the following 'ServerLayout'
|
|
||||||
section should be used in place of the one provided:
|
|
||||||
|
|
||||||
Section "ServerLayout"
|
|
||||||
Identifier "wsfb"
|
|
||||||
Screen 0 "Screen0" 0 0
|
|
||||||
InputDevice "wsmouse0" "CorePointer"
|
|
||||||
InputDevice "Keyboard0" "CoreKeyboard"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
- For systems with both UPA and VGA framebuffers, the device parameter
|
|
||||||
in the "Device" section must match the wsdisplay device corresponding
|
|
||||||
to the console (/dev/ttyC0 for wsdisplay0, /dev/ttyD0 for wsdisplay1,
|
|
||||||
etc).
|
|
||||||
|
|
||||||
- For systems with UPA Creator/Creator3D/Elite3D framebuffers use
|
|
||||||
DefaultDepth 24
|
|
||||||
in the "Screen" section.
|
|
||||||
|
|
||||||
- For systems with Expert3D framebuffers (using the ifb(4) kernel
|
|
||||||
driver), the driver name in the "Device" section should be "wildcatfb"
|
|
||||||
instead of "wsfb":
|
|
||||||
Driver "wildcatfb"
|
|
||||||
|
|
||||||
- What follows is a whole sample configuration file. Copy it to
|
|
||||||
/etc/X11/xorg.conf and customize it as described above.
|
|
||||||
|
|
||||||
-- Cut Here --
|
|
||||||
#
|
|
||||||
# Unaccelerated, single display configuration
|
|
||||||
#
|
|
||||||
Section "ServerLayout"
|
|
||||||
Identifier "wsfb"
|
|
||||||
Screen 0 "Screen0" 0 0
|
|
||||||
InputDevice "wsmouse0" "CorePointer"
|
|
||||||
InputDevice "Keyboard0" "CoreKeyboard"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
Section "Files"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# All Sun keyboards (USB Type 6, Serial Type 3/4/5/6)
|
|
||||||
Section "InputDevice"
|
|
||||||
Identifier "Keyboard0"
|
|
||||||
Driver "kbd"
|
|
||||||
Option "XkbModel" "sun"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# USB Mice
|
|
||||||
Section "InputDevice"
|
|
||||||
Identifier "wsmouse0"
|
|
||||||
Driver "mouse"
|
|
||||||
Option "Protocol" "wsmouse"
|
|
||||||
Option "Device" "/dev/wsmouse"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# Serial mice on zstty ports
|
|
||||||
Section "InputDevice"
|
|
||||||
Identifier "zsmouse0"
|
|
||||||
Driver "mouse"
|
|
||||||
Option "Protocol" "SunMouse"
|
|
||||||
Option "Device" "/dev/ttyc"
|
|
||||||
Option "Baudrate" "1200"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# Serial mice on com ports
|
|
||||||
Section "InputDevice"
|
|
||||||
Identifier "commouse0"
|
|
||||||
Driver "mouse"
|
|
||||||
Option "Protocol" "SunMouse"
|
|
||||||
Option "Device" "/dev/tty00"
|
|
||||||
Option "Baudrate" "1200"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# All monitors
|
|
||||||
Section "Monitor"
|
|
||||||
Identifier "Monitor"
|
|
||||||
VendorName "Unknown"
|
|
||||||
ModelName "Unknown"
|
|
||||||
# Adjust those to your monitor before using another device than wsfb
|
|
||||||
# or you can destroy it !!
|
|
||||||
HorizSync 31.5-60
|
|
||||||
VertRefresh 50-70
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# All framebuffers
|
|
||||||
Section "Device"
|
|
||||||
Identifier "Wsdisplay0"
|
|
||||||
Driver "wsfb"
|
|
||||||
Option "device" "/dev/ttyC0"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# All framebuffers
|
|
||||||
Section "Screen"
|
|
||||||
Identifier "Screen0"
|
|
||||||
Device "Wsdisplay0"
|
|
||||||
Monitor "Monitor"
|
|
||||||
DefaultDepth 8
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 8
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 16
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 24
|
|
||||||
EndSubSection
|
|
||||||
EndSection
|
|
||||||
#
|
|
||||||
# EOF
|
|
||||||
#
|
|
||||||
-- Cut Here --
|
|
||||||
|
|
||||||
Single, accelerated display
|
Single, accelerated display
|
||||||
---------------------------
|
---------------------------
|
||||||
@@ -165,7 +28,7 @@ of the video card, eg:
|
|||||||
wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0
|
wsdisplay0 at vgafb0: console (std, sun emulation), using wskbd0
|
||||||
|
|
||||||
The framebuffer is on bus 0, device 19, function 0. Now, using the
|
The framebuffer is on bus 0, device 19, function 0. Now, using the
|
||||||
configuration in the first section as a guide, replace the "Device" section
|
configuration in the first section as a guide, add a "Device" section
|
||||||
with something like the following (replace 0:19:0 with the bus:dev:func
|
with something like the following (replace 0:19:0 with the bus:dev:func
|
||||||
of the framebuffer):
|
of the framebuffer):
|
||||||
|
|
||||||
@@ -178,92 +41,49 @@ of the framebuffer):
|
|||||||
# Option "reference_clock" "29.5MHz"
|
# Option "reference_clock" "29.5MHz"
|
||||||
EndSection
|
EndSection
|
||||||
|
|
||||||
For UPA Creator framebuffers, the device can be automatically detected if
|
|
||||||
you don't have an xorg.conf file. Otherwise the "Device" section would
|
|
||||||
be something like:
|
|
||||||
|
|
||||||
Section "Device"
|
|
||||||
Identifier "Card0"
|
|
||||||
Driver "sunffb"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
It is also important that you modify the Monitor section and change the
|
|
||||||
HorizSync and VertRefresh parameters with those of the monitor in use.
|
|
||||||
Finally, customization of the Screen section will allow switching of
|
|
||||||
resolutions and setting the default bit depth, e.g.:
|
|
||||||
|
|
||||||
Section "Screen"
|
|
||||||
Identifier "Screen0"
|
|
||||||
Device "Card0"
|
|
||||||
Monitor "Monitor"
|
|
||||||
DefaultDepth 24
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 8
|
|
||||||
Modes "640x480" "800x600" "1024x768"
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 16
|
|
||||||
Modes "640x480" "800x600" "1024x768"
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 24
|
|
||||||
Modes "640x480" "800x600" "1024x768"
|
|
||||||
EndSubSection
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
See xorg.conf(5) for more options.
|
See xorg.conf(5) for more options.
|
||||||
|
|
||||||
|
For UPA Creator framebuffers, the device will be automatically detected
|
||||||
|
and you don't need to have an xorg.conf file.
|
||||||
|
|
||||||
|
To use xdm from rc.conf, it is necessary to disable /dev/console in
|
||||||
|
/etc/ttys, change the 'status' of /dev/console to 'off'.
|
||||||
|
|
||||||
Dual, unaccelerated display
|
Dual, unaccelerated display
|
||||||
---------------------------
|
---------------------------
|
||||||
Dual-headed displays are only supported on machines with SBus framebuffers.
|
Dual-headed displays are only supported on machines with SBus framebuffers.
|
||||||
Starting with the configuration in the first section, three additional
|
These configurations will require a configuration file.
|
||||||
sections are added for the second framebuffer:
|
Create /etc/X11/xorg.conf, with these two sections for each framebuffer:
|
||||||
|
|
||||||
Section "Device"
|
Section "Device"
|
||||||
Identifier "Wsdisplay1"
|
Identifier "Wsdisplay0"
|
||||||
Driver "wsfb"
|
Driver "wsfb"
|
||||||
Option "device" "/dev/ttyD0"
|
Option "device" "/dev/ttyC0"
|
||||||
EndSection
|
EndSection
|
||||||
|
|
||||||
Section "Monitor"
|
Section "Screen"
|
||||||
Identifier "Monitor1"
|
Identifier "Screen0"
|
||||||
VendorName "Unknown"
|
Device "Wsdisplay0"
|
||||||
ModelName "Unknown"
|
EndSection
|
||||||
# Adjust those to your monitor before using another device than wsfb
|
|
||||||
# or you can destroy it !!
|
|
||||||
HorizSync 31.5-60
|
|
||||||
VertRefresh 50-70
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
Section "Screen"
|
This example is for the first screen. For the others, increment the
|
||||||
Identifier "Screen1"
|
"Wsdisplay" and "Screen" numbers, and change the device to /dev/ttyD0
|
||||||
Device "Wsdisplay1"
|
for the second display, /dev/ttyE0 for the third, and so on.
|
||||||
Monitor "Monitor1"
|
|
||||||
DefaultDepth 8
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 8
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 16
|
|
||||||
EndSubSection
|
|
||||||
SubSection "Display"
|
|
||||||
Depth 24
|
|
||||||
EndSubSection
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
The ServerLayout section is also changed to include the second framebuffer
|
Then, you'll need to create a ServerLayout section describing all the
|
||||||
and its logical location relative to the first, e.g.:
|
displays and their location relative to the first, as in:
|
||||||
|
|
||||||
Section "ServerLayout"
|
Section "ServerLayout"
|
||||||
Identifier "wsfb"
|
Identifier "wsfb"
|
||||||
Screen 0 "Screen0"
|
Screen 0 "Screen0"
|
||||||
Screen 1 "Screen1" RightOf "Screen0"
|
Screen 1 "Screen1" RightOf "Screen0"
|
||||||
InputDevice "zsmouse0" "CorePointer"
|
EndSection
|
||||||
InputDevice "Keyboard0" "CoreKeyboard"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
See xorg.conf(5) for more options.
|
See xorg.conf(5) for more options.
|
||||||
|
|
||||||
|
To use xdm from rc.conf, it is necessary to disable /dev/console in
|
||||||
|
/etc/ttys, change the 'status' of /dev/console to 'off'.
|
||||||
|
|
||||||
problem_blurb
|
problem_blurb
|
||||||
|
|
||||||
$OpenBSD: README.sparc64,v 1.8 2009/02/15 15:27:40 matthieu Exp $
|
$OpenBSD: README.sparc64,v 1.9 2009/05/20 18:26:35 miod Exp $
|
||||||
|
|||||||
@@ -1,2 +1 @@
|
|||||||
./etc/X11/fs/config
|
./etc/X11/fs/config
|
||||||
./etc/X11/xorg.conf
|
|
||||||
|
|||||||
@@ -1,76 +0,0 @@
|
|||||||
#
|
|
||||||
# Unaccelerated, single display configuration
|
|
||||||
#
|
|
||||||
# $OpenBSD: xorg.conf,v 1.2 2007/08/26 07:38:37 matthieu Exp $
|
|
||||||
#
|
|
||||||
Section "ServerLayout"
|
|
||||||
Identifier "wsfb"
|
|
||||||
Screen 0 "Screen0" 0 0
|
|
||||||
InputDevice "zsmouse0" "CorePointer"
|
|
||||||
InputDevice "Keyboard0" "CoreKeyboard"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
Section "Files"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/OTF/"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
|
|
||||||
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
Section "InputDevice"
|
|
||||||
Identifier "Keyboard0"
|
|
||||||
Driver "kbd"
|
|
||||||
Option "Protocol" "wskbd"
|
|
||||||
Option "Device" "/dev/wskbd0"
|
|
||||||
Option "XkbRules" "xorg"
|
|
||||||
Option "XkbModel" "sun"
|
|
||||||
Option "XkbLayout" "us"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
Section "InputDevice"
|
|
||||||
Identifier "zsmouse0"
|
|
||||||
Driver "mouse"
|
|
||||||
Option "Protocol" "SunMouse"
|
|
||||||
Option "Device" "/dev/ttyc"
|
|
||||||
Option "Baudrate" "1200"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
Section "Monitor"
|
|
||||||
Identifier "Monitor"
|
|
||||||
VendorName "Unknown"
|
|
||||||
ModelName "Unknown"
|
|
||||||
# Adjust these to your monitor before using device other than wsfb
|
|
||||||
# or you could damage it!
|
|
||||||
HorizSync 31.5-60
|
|
||||||
VertRefresh 50-70
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# All framebuffers
|
|
||||||
Section "Device"
|
|
||||||
Identifier "Wsdisplay0"
|
|
||||||
Driver "wsfb"
|
|
||||||
Option "device" "/dev/ttyC0"
|
|
||||||
EndSection
|
|
||||||
|
|
||||||
# All framebuffers
|
|
||||||
Section "Screen"
|
|
||||||
Identifier "Screen0"
|
|
||||||
Device "Wsdisplay0"
|
|
||||||
Monitor "Monitor"
|
|
||||||
SubSectionSub "Display"
|
|
||||||
Depth 1
|
|
||||||
EndSubSection
|
|
||||||
SubSectionSub "Display"
|
|
||||||
Depth 8
|
|
||||||
EndSubSection
|
|
||||||
SubSectionSub "Display"
|
|
||||||
Depth 16
|
|
||||||
EndSubSection
|
|
||||||
SubSectionSub "Display"
|
|
||||||
Depth 24
|
|
||||||
EndSubSection
|
|
||||||
SubSectionSub "Display"
|
|
||||||
Depth 32
|
|
||||||
EndSubSection
|
|
||||||
EndSection
|
|
||||||
Reference in New Issue
Block a user