Estimated hours taken: 4
Branches: main
Preliminary working on converting the termination analyser to use the
intermodule analysis framework. This mainly involves threading the
module_info and io.state through more of the code and changing some code that
was semidet to det returning a boolean (because it now takes the
io.state). I've put placeholders , XXX intermod, in the spots that need to be
further modified.
compiler/term_errors.m:
compiler/term_pass1.m:
compiler/term_pass2.m:
compiler/term_util.m:
compiler/term_traversal.m:
compiler/termination.m:
Prepare to convert termination analysis to use the intermodule
analysis framework.
Fix some layout problems.
Estimated hours taken: 4
Branches: main
compiler/*.m:
Use expect/3 in place of require/2 throughout most of the
compiler.
Use unexpected/2 (or sorry/2) in place of error/1 in more
places.
Fix more dodgy assertion error messages.
s/map(prog_var, mer_type)/vartypes/ where the latter is meant.
Estimated hours taken: 2
Branches: main
Clean up the termination analysis modules and bring them into line with our
current coding standards. There are no major changes to any algorithms,
although there are a few minor ones, e.g. converting if-then-elses into
switches and alike.
compiler/termination.m:
compiler/term_errors.m:
compiler/term_norm.m:
compiler/term_pass1.m:
compiler/term_pass2.m:
compiler/term_traversal.m:
compiler/term_util.m:
Convert these modules to use 4-space indentation.
s/Module/ModuleInfo/
Use unexpected/2 in place of error/1.
Replace some if-then-elses with switches, and make use of the enhanced
switch detection capability.
Rename some predicates where the existing name wasn't clear or where
it avoids excessive module qualification in importing modules.
Position comments according to our current coding standards.
Use a '.' as a module qualifier throughout.
Delete the comment about how to add support for a new norm, that
information is now in term_norm and in any case the comment was
incorrect (it referred types that no longer exist).
Delete a long obsolete comment that describes the analyser's interface
to the lp_solve package.
compiler/mercury_compile.m:
Conform to the above changes.
Estimated hours taken: 8
Branches: main
Improve the error messages generated for determinism errors involving committed
choice contexts. Previously, we printed a message to the effect that e.g.
a cc pred is called in context that requires all solutions, but we didn't say
*why* the context requires all solutions. We now keep track of all the goals
to the right that could fail, since it is these goals that may reject the first
solution of a committed choice goal.
The motivation for this diff was the fact that I found that locating the
failing goal can be very difficult if the conjunction to the right is
a couple of hundred lines long. This would have been a nontrivial problem,
since (a) unifications involving values of user-defined types are committed
choice goals, and (b) we can expect uses of user-defined types to increase.
compiler/det_analysis.m:
Keep track of goals to the right of the current goal that could fail,
and include them in the error representation if required.
compiler/det_report.m:
Include the list of failing goals to the right in the representations
of determinism errors involving committed committed choice goals.
Convert the last part of this module that wasn't using error_util
to use error_util. Make most parts of this module just construct
error message specifications; print those specifications (using
error_util) in only a few places.
compiler/hlds_out.m:
Add a function for use by the new code in det_report.m.
compiler/error_util.m:
Add a function for use by the new code in det_report.m.
compiler/error_util.m:
compiler/compiler_util.m:
Error_util is still changing reasonably often, and yet it is
included in lots of modules, most of which need only a few simple
non-parse-tree-related predicates from it (e.g. unexpected).
Move those predicates to a new module, compiler_util.m. This also
eliminates some undesirable dependencies from libs to parse_tree.
compiler/libs.m:
Include compiler_util.m.
compiler/notes/compiler_design.html:
Document compiler_util.m, and fix the documentation of some other
modules.
compiler/*.m:
Import compiler_util instead of or in addition to error_util.
To make this easier, consistently use . instead of __ for module
qualifying module names.
tests/invalid/det_errors_cc.{m,err_exp}:
Add this new test case to test the error messages for cc contexts.
tests/invalid/det_errors_deet.{m,err_exp}:
Add this new test case to test the error messages for unifications
inside function symbols.
tests/invalid/Mmakefile:
Add the new test cases.
tests/invalid/det_errors.err_exp:
tests/invalid/magicbox.err_exp:
Change the expected output to conform to the change in det_report.m,
which is now more consistent.
Estimated hours taken: 8
Branches: main
compiler/*.m:
Rename the types 'type', 'inst' and 'mode' to 'mer_type', 'mer_inst'
and 'mer_mode'. This is to avoid the need to parenthesize these type
names in some contexts, and to prepare for the possibility of a parser
that considers those words to be reserved words.
Rename some other uses of those names (e.g. as item types in
recompilation.m).
Delete some redundant synonyms (prog_type, mercury_type) for mer_type.
Change some type names (e.g. mlds__type) and predicate names (e.g.
deforest__goal) to make them unique even without module qualification.
Rename the function symbols (e.g. pure, &) that need to be renamed
to avoid the need to parenthesize them. Make their replacement names
more expressive.
Convert some more modules to four space indentation.
Avoid excessively long lines, such as those resulting from the
automatic substitution of 'mer_type' for 'type'.
Estimated hours taken: 5
Branches: main
Add the capability for the old termination analyser to make use of the
results of closure analysis when analysing generic calls. This is part
of a larger set of changes to add support for analysing higher-order
constructs to both termination analyses and the exception analysis.
XXX This change is not particularly useful at the moment because the
procedure dependency graphs we construct do not record information
about higher-order calls. I'll add some test cases for termination
analysis of generic calls when this is fixed.
TODO
- improve warning messages where the values of higher-order
variables are known.
compiler/term_traversal.m:
When processing generic_calls optionally use information derived
from closure analysis.
compiler/mercury_compile.m:
Optionally run closure analysis when building the .trans_opt files.
Don't look up the value of the analyse_closures option twice.
compiler/term_errors.m:
Distinguish between the different types of generic_call that can be
made. Specialise the warnings produced by the termination analyser
for each type.
compiler/term_util.m:
Add a utility predicate that checks whether the termination_info
for a given procedure has been set to cannot_loop(_).
tests/term/existential_error1.trans_opt_exp:
Update the expected output of this test case. It's changed
because unsafe_cast is now considered to be terminating.
Estimated hours taken: 3
Branches: main
compiler/*.m:
Import only one module per line in the modules of the compiler
where my previous diff did not already do so.
Misc other cleanups.
Where relevant, use the new mechanism in tree.m.
compiler/tree.m:
Fix a performance problem I noticed while update :- import_module
items. Instead of supplying a function to convert lists of trees
to a tree, make the tree data structure able to hold a list of
subtrees directly. This reduces the number of times where we have to
convert list of trees to trees that are sticks just to stay within
the old definition of what a tree is.
Estimated hours taken: 4
Branches: main
compiler/*.m:
Change a bunch of modules to import only one module per line, even
from the library.
compiler/mlds_to_il.m:
compiler/mlds_to_managed.m:
Convert these modules to our current coding style. Use state variables
where appropriate. Use predmode declarations where possible.
Estimated hours taken: 8
Branches: main
compiler/hlds_out.m:
compiler/llds_out.m:
Bring these modules up to date with our current style guidelines.
Use state variables in the few places where we weren't doing so
already.
compiler/purity.m:
Bring this module up to date with our current style guidelines.
Use the predicates of error_util and hlds_error_util to print error
messages. Be more consistent in using quotations. Fix indentation.
compiler/error_util.m:
Add a long needed facility: the ability to glue some punctuation
at the end of a previous word.
Add a mechanism for turning a list of components into a string,
instead of printing them out.
Make the interface of this module more consistent by making
list_to_pieces a function just like component_lists_to_pieces.
compiler/hlds_error_util.m:
Change the way we describe predicates and procedures. Instead of
returning their descriptions as single fixed strings that error_util
can't break up across lines, return them as separate components that
can be split across lines. This makes error output look nicer.
Fix a mismatch between what were supposed to be corresponding pieces
of code in hlds_error_util and hlds_out.
Turn the appropriate predicates into functions.
compiler/*.m:
Conform to the changed interfaces of some of the above modules.
tests/invalid/*.err_exp:
tests/invalid/purity/*.err_exp:
tests/recompilation/*.err_exp:
tests/warnings/*.exp:
Update the expected outputs for the better looking error messages we
now generate.
Estimated hours taken: 16
Branches: main
compiler/aditi_builtin_ops.m:
compiler/bytecode.m:
compiler/bytecode_backend.m:
compiler/bytecode_gen.m:
compiler/c_util.m:
compiler/code_gen.m:
compiler/deep_profiling.m:
compiler/deforest.m:
compiler/dependency_graph.m:
compiler/fact_table.m:
compiler/follow_code.m:
compiler/handle_options.m:
compiler/hlds_out.m:
compiler/il_peephole.m:
compiler/ilasm.m:
compiler/java_util.m:
compiler/liveness.m:
compiler/magic.m:
compiler/magic_util.m:
compiler/make.dependencies.m:
compiler/make.m:
compiler/make.module_dep_file.m:
compiler/make.program_target.m:
compiler/make.util.m:
compiler/matching.m:
compiler/name_mangle.m:
compiler/opt_debug.m:
compiler/opt_util.m:
compiler/options.m:
compiler/options_file.m:
compiler/prog_io.m:
compiler/rtti_out.m:
compiler/rtti_to_mlds.m:
compiler/saved_vars.m:
compiler/source_file_map.m:
compiler/stack_alloc.m:
compiler/stack_layout.m:
compiler/stratify.m:
compiler/switch_detection.m:
compiler/term_errors.m:
compiler/type_ctor_info.m:
compiler/unify_proc.m:
compiler/unique_modes.m:
Bring these modules up to date with our coding guidelines. Use predmode
syntax for declarations. Use state variable syntax where appropriate,
and reorder arguments where this is needed for the use of state
variable syntax. Remove module qualification from the names of defined
predicates when the module qualification was used inconsistently
(causing problems for the use of tags) or was causing problems with
indentation.
There are no changes in algorithms.
Estimated hours taken: 6
Branches: main
Detect when a predicate has a pair of I/O states but isn't det or cc_multi.
Improve the generation of determinism error messages.
compiler/det_analysis.m:
Detect when a predicate has a pair of I/O states but isn't det or
cc_multi.
Factor out some common code.
compiler/det_report.m:
Add the new error type for predicates with I/O states.
Use error_util much more extensively to generate error messages.
compiler/hlds_out.m:
For several existing predicates that write out various HLDS
constructs, provide versions that return representations of those
constructs as strings or as error_util pieces, for use by det_report.m.
Redefine the old predicates as simply printing the output of the new
predicates where relevant, to avoid code duplication.
compiler/error_util.m:
When describing a predicate name, specify whether we want to module
qualify the name or not. The intention is that when generating a kind
of error message which can only be generated for predicates defined
in the current module, the module prefix should be omitted in the
interest of clarity.
compiler/accumulator.m:
compiler/dead_proc_elim.m:
compiler/magic_util.m:
compiler/table_gen.m:
compiler/term_errors.m:
compiler/termination.m:
compiler/typecheck.m:
Conform to the changes in error_util.m.
compiler/globals.m:
Reorder arguments to allow the use of state variable notation.
compiler/handle_globals.m:
compiler/mercury_compile.m:
compiler/source_file_map.m:
Conform to the changed argument order in globals.m.
tests/invalid/aditi_update_errors.err_exp:
tests/invalid/errors2.err_exp2:
tests/invalid/external.err_exp:
tests/invalid/ho_unique_error.err_exp:
tests/invalid/magicbox.err_exp:
tests/invalid/missing_det_decls.err_exp:
tests/invalid/mostly_uniq1.err_exp:
tests/invalid/mostly_uniq2.err_exp:
tests/invalid/multimode_syntax.err_exp:
tests/invalid/multisoln_func.err_exp:
tests/invalid/pragma_c_code_dup_var.err_exp:
tests/invalid/pragma_c_code_no_det.err_exp:
tests/invalid/prog_io_erroneous.err_exp2:
tests/invalid/qualified_cons_id2.err_exp:
tests/invalid/record_syntax_errors.err_exp:
tests/invalid/state_vars_test1.err_exp:
tests/invalid/state_vars_test2.err_exp:
tests/invalid/state_vars_test3.err_exp:
tests/invalid/typeclass_mode.err_exp:
tests/invalid/types.err_exp2:
tests/invalid/undef_mode_and_no_clauses.err_exp:
tests/recompilation/typeclass_method_pragma_r.err_exp.2:
tests/warnings/ambiguous_overloading.exp:
tests/warnings/duplicate_call.exp:
tests/warnings/duplicate_const.exp:
tests/warnings/infinite_recursion.exp:
tests/warnings/simple_code.exp:
tests/warnings/warn_dead_procs.exp:
tests/warnings/warn_stubs.exp:
Update these files to expect the better error messages we now generate.
Estimated hours taken: 8
Branches: main
analysis/analysis.m:
browser/browse.m:
compiler/accumulator.m:
compiler/assertion.m:
compiler/atsort.m:
compiler/c_util.m:
compiler/check_typeclass.m:
compiler/clause_to_proc.m:
compiler/code_gen.m:
compiler/code_model.m:
compiler/const_prop.m:
compiler/constraint.m:
compiler/dead_proc_elim.m:
compiler/delay_construct.m:
compiler/dependency_graph.m:
compiler/det_analysis.m:
compiler/det_report.m:
compiler/export.m:
compiler/fact_table.m:
compiler/follow_code.m:
compiler/graph_colour.m:
compiler/hlds_module.m:
compiler/inlining.m:
compiler/llds.m:
compiler/make_hlds.m:
compiler/mercury_to_mercury.m:
compiler/ml_tailcall.m:
compiler/ml_unify_gen.m:
compiler/mmc_analysis.m:
compiler/mode_errors.m:
compiler/passes_aux.m:
compiler/post_typecheck.m:
compiler/size_prof.m:
compiler/switch_util.m:
compiler/table_gen.m:
compiler/term_errors.m:
compiler/transform_llds.m:
compiler/type_util.m:
compiler/unify_gen.m:
compiler/unneeded_code.m:
compiler/unused_args.m:
Bring these modules up to our current coding standards. Use predmode
declarations and state variable syntax where relevant. Reorder
arguments where this is needed for the use state variables. Make the
orders of predicate definitions correspond to the order of their
declarations. Replace some overly large lambda expressions with named
predicates. Convert some predicates to functions where this makes
their use more convenient. Use field access notation where convenient.
Fix any inconsistent indentation. Remove module prefixes on predicate
names where this is necessary to allow sane indentation.
In several places, use predicates from error_util.m to print error
messages. Apart from this, there are no changes in algorithms.
In some places, conform to the changes below.
compiler/error_util.m:
compiler/hlds_error_util.m:
Add new variants of existing predicates for use in some of the
changed modules above.
compiler/hlds_out.m:
Add some functions to convert values of some HLDS types as strings,
for use in preparing the arguments of the new calls to predicates in
error_util.m. Change the implementations of the predicates that print
values of those types to call those functions instead of allowing
code duplication.
compiler/llds.m:
Add some field names to allow use of field updates where relevant.
tests/invalid/assert_in_interface.err_exp:
tests/invalid/multisoln_func.err_exp:
tests/invalid/tricky_assert1.err_exp:
Update the expected outputs of these test cases to allow for them being
generated by error_util.m, and hence being better formatted than
before.
Estimated hours taken: 8
Branches: main
compiler/modules.m:
compiler/compile_target_code.m:
compiler/handle_options.m:
compiler/bytecode_data.m:
compiler/prog_io_util.m:
Bring these modules up to date with our current coding style. Use
predmode declarations and state variable syntax where appropriate.
Fix inconsistent indentation. Print more error messages using
error_util.m for printing error messages.
compiler/trace_param.m:
Add a new predicate for use by the updated code in handle_options.m.
compiler/error_util.m:
compiler/hlds_error_util.m:
Make error_util.m to be a submodule of parse_tree.m, not hlds.m.
Most of its predicates are not dependent on HLDS data structures.
Move the ones that are into a new module, hlds_error_util, that
is a submodule of hlds.m. Overall, this reduces the dependence
of submodules of parse_tree.m, including modules.m, on submodules
of hlds.m.
compiler/notes/compiler_design.html:
Update the documentation of compiler modes to account for
hlds_error_util.m.
compiler/hlds.m:
compiler/parse_tree.m:
Update the list of included submodules.
compiler/*.m:
Update module imports and module qualifications as needed for the
change above.
tests/invalid/*.{exp,exp2}:
Update the expected outputs of a bunch of test cases to reflect the new
format of some warning messages due to the user error_util; they now
observe line length limits, and print contexts in some cases where they
were previously missing.
Estimated hours taken: 19
Branches: main
Change how the termination analysis deals with foreign_procs.
Add `terminates' and `does_not_terminate' as foreign proc attributes.
Currently the termination analysis assumes that all procedures implemented
via the foreign language interface will terminate. For foreign code
that does not make calls back to Mercury this is generally the behaviour
we want but for foreign code that does make calls back to Mercury we should
not assume termination because we do not know what Mercury procedures may be
called.
This change alters the termination analysis so that in the absence of
of any user supplied information foreign_procs that do not call Mercury
are considered terminating and those that do make calls back to Mercury
are non-terminating. This new behaviour is safer than the old behaviour.
For example some of the compiler's optimization passes may rely on
information from the termination analysis about whether or not a predicate
will terminate.
The second part of this diff adds `terminates' and `does_not_terminate'
as foreign_proc attributes. This is a cleaner way of specifying termination
properties than pragma terminates/does_not_terminate and it is also
more flexible than the pragmas. For example, in cases where procedures have
both foreign and Mercury clauses, pragma terminates/does_not_terminate
declarations will apply to both. Foreign code attributes allows us to
specify the termination properties of the foreign clauses and leave the
termination analysis to work out the termination properties of the
Mercury clauses.
compiler/hlds_pred.m:
compiler/prog_data.m:
compiler/prog_io_pragma:
Handle terminates/does_not_terminate as foreign proc attributes.
compiler/term_errors.m:
compiler/term_traversal.m:
compiler/termination.m:
Handle terminates/does_not_terminate as foreign proc attributes.
Check that the foreign proc attributes do not conflict with any
termination pragmas that the user has supplied.
Modify assumptions about the termination of foreign procs.
compiler/term_util.m:
Move some utility predicates to this module.
doc/reference_manual.texi:
Document new foreign proc attributes and the new behaviour
of the termination analysis for foreign_procs.
Fix a typo.
tests/term/Mmakefile:
tests/term/foreign_valid.m:
tests/term/foreign_valid.trans_opt_exp:
tests/warnings/Mmakefile:
tests/warnings/Mercury.options:
tests/warnings/foreign_term_invalid.m:
tests/warnings/foreign_term_invalid.exp:
Test cases for the above.
Estimated hours taken: 4
Branches: main
This diff contains no changes in algorithms whatsoever.
browser/*.m:
compiler/*.m:
library/*.m:
Replace old-style lambdas with new-style lambdas or with named
procedures.
Estimated hours take: 5.5
Branches: main
Fix a bug in the termination analyser that caused it to ignore
pragma terminates/does_not_terminate declarations.
BUGS:
Delete the description of the bug regarding does_not_terminate
pragmas.
compiler/error_util:
Add a predicate describe_several_pred_names/3.
compiler/term_errors:
Add an error type indicating that the cause of non-termination was
inconsistent termination pragmas.
compiler/termination:
Fix a bug that caused pragma terminates and pragma does_not_terminate
declarations to be ignored.
Check that SCCs in the call-graph have not been annotated with
termination pragmas that are inconsistent.
Remove some old style lambda expressions.
doc/reference_manual.texi:
Describe how pramga terminates/does_not_terminate interact with
mutually recursive procedures.
tests/term/Mmakefile:
tests/term/pragma_non_term.m:
tests/term/pragma_non_term.trans_opt_exp:
tests/term/pragma_term.m:
tests/term/pragam_term.trans_opt_exp:
tests/warnings/Mercury.options:
tests/warnings/Mmakefile:
tests/warnings/pragma_term_conflict.m:
tests/warnings/pragma_term_conflict.exp:
Add some test cases for the termination pragmas.
Estimated hours taken: 2
Branches: main
compiler/*.m:
Import only one compiler module per line. Sort the blocks of imports.
This makes it easier to merge in changes.
In a couple of places, remove unnecessary imports.
The main aim of this change is to make the overall, high-level structure
of the compiler clearer, and to encourage better encapsulation of the
major components.
compiler/libs.m:
compiler/backend_libs.m:
compiler/parse_tree.m:
compiler/hlds.m:
compiler/check_hlds.m:
compiler/transform_hlds.m:
compiler/bytecode_backend.m:
compiler/aditi_backend.m:
compiler/ml_backend.m:
compiler/ll_backend.m:
compiler/top_level.m:
New files. One module for each of the major components of the
Mercury compiler. These modules contain (as separate sub-modules)
all the other modules in the Mercury compiler, except gcc.m and
mlds_to_gcc.m.
Mmakefile:
compiler/Mmakefile:
Handle the fact that the top-level module is now `top_level',
not `mercury_compile' (since `mercury_compile' is a sub-module
of `top_level').
compiler/Mmakefile:
Update settings of *FLAGS-<modulename> to use the appropriate
nested module names.
compiler/recompilation_check.m:
compiler/recompilation_version.m:
compiler/recompilation_usage.m:
compiler/recompilation.check.m:
compiler/recompilation.version.m:
compiler/recompilation.version.m:
Convert the `recompilation_*' modules into sub-modules of the
`recompilation' module.
compiler/*.m:
compiler/*.pp:
Module-qualify the module names in `:- module', `:- import_module',
and `:- use_module' declarations.
compiler/base_type_info.m:
compiler/base_type_layout.m:
Deleted these unused empty modules.
compiler/prog_data.m:
compiler/globals.m:
Move the `foreign_language' type from prog_data to globals.
compiler/mlds.m:
compiler/ml_util.m:
compiler/mlds_to_il.m:
Import `globals', for `foreign_language'.
Mmake.common.in:
trace/Mmakefile:
runtime/Mmakefile:
Rename the %.check.c targets as %.check_hdr.c,
to avoid conflicts with compiler/recompilation.check.c.
Estimated hours taken: 15
Add preliminary support for a new pragma:
:- pragma foreign_code(LanguageString, .... <same args as c_code>).
This is intended to be the eventual replacement of pragma c_code.
Presently the only valid language is "C".
The existing pragma c_code is simply turned into pragma foreign_code.
pragma foreign_code is not a supported pragma at the moment. There are
several other changes that are intended (for example, foreign_code will
be impure by default).
This change also changes the HLDS goal pragma_c_code/7 to
pragma_foreign_code/8 where the extra argument is the foreign language.
Any code currently generating output for pragma C code simply checks
that the foreign language is set to "c". Since this is the only
alternative of the type foreign_language, it will always succeed.
However when new alternatives are added it should be fairly easy to find
where the changes need to be made.
Some type names and predicate names have also been updated, however
there are many more that haven't yet been touched.
compiler/prog_io_pragma.m:
Accept the new syntax. Turn the old syntax into the new item.
compiler/hlds_goal.m:
Change pragma_c_code/7 to pragma_foreign_code/8.
Define the foreign_language type.
compiler/llds.m:
Change user_c_code/2 to user_foreign_code/3.
compiler/*.m:
Update the rest of the compiler to handle these types.
Make a few small changes to update variable names, predicate
names and type names.
Estimated hours taken: 0.5
compiler/error_util.m:
compiler/term_errors.m:
Change code to output predicate names and pragma declarations
to be consistent with other error messages.
Fix some tense inconsistencies and grammar errors in the
termination error messages.
Estimated hours taken: 1200
Aditi compilation.
compiler/options.m:
The documentation for these is commented out because the Aditi
system is not currently useful to the general public.
--aditi: enable Aditi compilation.
--dump-rl: write the intermediate RL to `<module>.rl_dump'.
--dump-rl-bytecode: write a text version of the bytecodes
to `<module>.rla'
--aditi-only: don't produce a `.c' file.
--filenames-from-stdin: accept a list of filenames to compile
from stdin. This is used by the query shell.
--optimize-rl, --optimize-rl-cse, --optimize-rl-invariants,
--optimize-rl-index, --detect-rl-streams:
Options to control RL optimization passes.
--aditi-user:
Default owner of any Aditi procedures,
defaults to $USER or "guest".
--generate-schemas:
write schemas for base relations to `<module>'.base_schema
and schemas for derived relations to `<module>'.derived_schema.
This is used by the query shell.
compiler/handle_options.m:
Handle the default for --aditi-user.
compiler/hlds_pred.m:
compiler/prog_data.m:
compiler/prog_io_pragma.m:
compiler/make_hlds.m:
Add some Aditi pragma declarations - `aditi', `supp_magic', `context',
`naive', `psn' (predicate semi-naive), `aditi_memo', `aditi_no_memo',
`base_relation', `owner' and `index'.
Separate out code to parse a predicate name and arity.
compiler/hlds_pred.m:
Add predicates to identify Aditi procedures.
Added markers `generate_inline' and `aditi_interface', which
are used internally for Aditi code generation.
Add an `owner' field to pred_infos, which is used for database
security checks.
Add a field to pred_infos to hold the list of indexes for a base
relation.
compiler/make_hlds.m:
Some pragmas must be exported if the corresponding predicates
are exported, check this.
Make sure stratification of Aditi procedures is checked.
Predicates with a mode declaration but no type declaration
are no longer assumed to be local.
Set the `do_aditi_compilation' field of the module_info if there
are any local Aditi procedures or base relations.
Check that `--aditi' is set if Aditi compilation is required.
compiler/post_typecheck.m:
Check that every Aditi predicate has an `aditi__state' argument,
which is used to ensure sequencing of updates and that Aditi
procedures are only called within transactions.
compiler/dnf.m:
Changed the definition of disjunctive normal form slightly
so that a call followed by some atomic goals not including
any database calls is considered atomic. magic.m can handle
this kind of goal, and it results in more efficient RL code.
compiler/hlds_module.m:
compiler/dependency_graph.m:
Added dependency_graph__get_scc_entry_points which finds
the procedures in an SCC which could be called from outside.
Added a new field to the dependency_info, the
aditi_dependency_ordering. This contains all Aditi SCCs of
the original program, with multiple SCCs merged where
possible to improve the effectiveness of differential evaluation
and the low level RL optimizations.
compiler/hlds_module.m:
Add a field to record whether there are any local Aditi procedures
in the current module.
Added versions of module_info_pred_proc_info and
module_info_set_pred_proc_info which take a pred_proc_id,
not a separate pred_id and proc_id.
compiler/polymorphism.m:
compiler/lambda.m:
Make sure that predicates created for closures in Aditi procedures
have the correct markers.
compiler/goal_util.m:
Added goal_util__switch_to_disjunction,
goal_util__case_to_disjunct (factored out from simplify.m)
and goal_util__if_then_else_to_disjunction. These are
require because supplementary magic sets can't handle
if-then-elses or switches.
compiler/type_util.m:
Added type_is_aditi_state/1.
compiler/mode_util.m:
Added partition_args/5 which partitions a list of arguments
into inputs and others.
compiler/inlining.m:
Don't inline memoed procedures.
Don't inline Aditi procedures into non-Aditi procedures.
compiler/intermod.m:
Handle Aditi markers.
Clean up handling of markers which should not appear in `.opt' files.
compiler/simplify.m:
Export a slightly different interface for use by magic.m.
Remove explicit quantifications where possible.
Merge multiple nested quantifications.
Don't report infinite recursion warnings for Aditi procedures.
compiler/prog_out.m:
Generalised the code to output a module list to write any list.
compiler/code_gen.m:
compiler/arg_info.m:
Don't process Aditi procedures.
compiler/mercury_compile.m:
Call magic.m and rl_gen.m.
Don't perform the low-level annotation passes on Aditi procedures.
Remove calls to constraint.m - sometime soon a rewritten version
will be called directly from deforestation.
compiler/passes_aux.m:
Add predicates to process only non-Aditi procedures.
compiler/llds.m:
compiler/llds_out.m:
Added new `code_addr' enum members, do_{det,semidet,nondet}_aditi_call,
which are defined in extras/aditi/aditi.m.
compiler/call_gen.m:
Handle generation of do_*_aditi_call.
compiler/llds_out.m:
Write the RL code for the module as a constant char array
in the `.c' file.
compiler/term_errors.m:
compiler/error_util.m:
Move code to describe predicates into error_util.m
Allow the caller to explicitly add line breaks.
Added error_util:list_to_pieces to format a list of
strings.
Reordered some arguments for currying.
compiler/hlds_out.m:
Don't try to print clauses if there are none.
runtime/mercury_init.h:
util/mkinit.c:
scripts/c2init.in:
Added a function `mercury__load_aditi_rl_code()' to the generated
`<module>_init.c' file which throws all the RL code for the program
at the database. This should be called at connection time by
`aditi__connect'.
Added an option `--aditi' which controls the output
`mercury__load_aditi_rl_code()'.
compiler/notes/compiler_design.html:
Document the new files.
Mmakefile:
bindist/Mmakefile:
Don't distribute extras/aditi yet.
New files:
compiler/magic.m:
compiler/magic_util.m:
Supplementary magic sets transformation. Report errors
for constructs that Aditi can't handle.
compiler/context.m:
Supplementary context transformation.
compiler/rl_gen.m:
compiler/rl_relops.m:
Aditi code generation.
compiler/rl_info.m:
Code generator state.
compiler/rl.m:
Intermediate RL representation.
compiler/rl_util:
Predicates to collect information about RL instructions.
compiler/rl_dump.m:
Print out the representation in rl.m.
compiler/rl_opt.m:
Control low-level RL optimizations.
compiler/rl_block.m:
Break a procedure into basic blocks.
compiler/rl_analyse.m:
Generic dataflow analysis for RL procedures.
compiler/rl_liveness.m:
Make sure all relations are initialised before used, clear
references to relations that are no longer required.
compiler/rl_loop.m:
Loop invariant removal.
compiler/rl_block_opt.m:
CSE and instruction merging on basic blocks.
compiler/rl_key.m:
Detect upper/lower bounds for which a goal could succeed.
compiler/rl_sort.m:
Use indexing for joins and projections.
Optimize away unnecessary sorting and indexing.
compiler/rl_stream.m:
Detect relations which don't need to be materialised.
compiler/rl_code.m:
RL bytecode definitions. Automatically generated from the Aditi
header files.
compiler/rl_out.m:
compiler/rl_file.m:
Output the RL bytecodes in binary to <module>.rlo (for use by Aditi)
and in text to <module>.rla (for use by the RL interpreter).
Also output the schema information if --generate-schemas is set.
compiler/rl_exprn.m:
Generate bytecodes for join conditions.
extras/aditi/Mmakefile:
extras/aditi/aditi.m:
Definitions of some Aditi library predicates and the
interfacing and transaction processing code.
Estimated hours taken: 20
These changes make `var' and `term' polymorphic. This allows us to make
variables and terms representing types of a different type to those
representing program terms and those representing insts.
These changes do not *fix* any existing problems (for instance
there was a messy conflation of program variables and inst variables,
and where necessary I've just called varset__init(InstVarSet) with
an XXX comment).
NEWS:
Mention the changes to the standard library.
library/term.m:
Make term, var and var_supply polymorphic.
Add new predicates:
term__generic_term/1
term__coerce/2
term__coerce_var/2
term__coerce_var_supply/2
library/varset.m:
Make varset polymorphic.
Add the new predicate:
varset__coerce/2
compiler/prog_data.m:
Introduce type equivalences for the different kinds of
vars, terms, and varsets that we use (tvar and tvarset
were already there but have been changed to use the
polymorphic var and term).
Also change the various kinds of items to use the appropriate
kinds of var/varset.
compiler/*.m:
Thousands of boring changes to make the compiler type correct
with the different types for type, program and inst vars and
varsets.
Estimated hours taken: 24
Add code to parse terms from strings rather than from streams.
The original intention for this change was twofold:
to increase expressiveness and to improve efficiency.
However, for the moment I have given up on the goal of
improving efficiency.
library/io.m:
Add io__read_file_as_string/{4,5}, for efficiently
reading a whole file into a single string.
Add io__read_from_string/5, for reading terms of
any type from a string.
(Should that instead be named string__read instead?)
library/string.m:
Implement string__substring/4 more efficiently,
using `pragma c_code' rather than by calling
string__right(string__left(...)).
Export string__unsafe_index/3, and add new exported
predicate string__unsafe_substring/4 -- these
are versions of string__index and string__substring
that don't check for range errors. They are
needed to get reasonable efficiency when dealing
with very large strings.
library/string.nu.nl:
Add Prolog implementations of string__substring
and string__unsafe_substring.
library/lexer.m:
Add lexer__string_get_token_list/{5,6}, for parsing
tokens from a string. This required adding
`string_' versions of most of the lexical analysis routines.
XXX lots of code duplication, I'm afraid.
XXX the string versions are not as efficiency as they
could ideally be.
library/parser.m:
Add new predicates parser__read_term_from_string/{4,6}
and parser__parse_token_list.
compiler/bytecode_gen.m:
compiler/error_util.m:
compiler/fact_table.m:
compiler/term_errors.m:
Minor changes to use term__context as an ADT rather than
as a concrete data type.
In addition, I made the following changes, which I am NOT committing.
compiler/prog_io.m:
Change to use io__read_file_as_string and
parser__read_term_from_string.
(Not committed because the existing method is
in currently more efficient.)
library/term.m:
Add new alternative term__detailed_context to the term__context type.
This alternative can record both the start and end of a term rather
than just the end.
(The lexer now has almost all the necessary support for detailed
contexts, but enabling it would have some potentially significant
efficiency costs, and curently the parser uses only single contexts
rather than ranges; so currently this is not used.)
Estimated hours taken: 50
Add support for nested modules.
- module names may themselves be module-qualified
- modules may contain `:- include_module' declarations
which name sub-modules
- a sub-module has access to all the declarations in the
parent module (including its implementation section).
This support is not yet complete; see the BUGS and LIMITATIONS below.
LIMITATIONS
- source file names must match module names
(just as they did previously)
- mmc doesn't allow path names on the command line any more
(e.g. `mmc --make-int ../library/foo.m').
- import_module declarations must use the fully-qualified module name
- module qualifiers must use the fully-qualified module name
- no support for root-qualified module names
(e.g. `:parent:child' instead of `parent:child').
- modules may not be physically nested (only logical nesting, via
`include_module').
BUGS
- doesn't check that the parent module is imported/used before allowing
import/use of its sub-modules.
- doesn't check that there is an include_module declaration in the
parent for each module claiming to be a child of that parent
- privacy of private modules is not enforced
-------------------
NEWS:
Mention that we support nested modules.
library/ops.m:
library/nc_builtin.nl:
library/sp_builtin.nl:
compiler/mercury_to_mercury.m:
Add `include_module' as a new prefix operator.
Change the associativity of `:' from xfy to yfx
(since this made parsing module qualifiers slightly easier).
compiler/prog_data.m:
Add new `include_module' declaration.
Change the `module_name' and `module_specifier' types
from strings to sym_names, so that module names can
themselves be module qualified.
compiler/modules.m:
Add predicates module_name_to_file_name/2 and
file_name_to_module_name/2.
Lots of changes to handle parent module dependencies,
to create parent interface (`.int0') files, to read them in,
to output correct dependencies information for them to the
`.d' and `.dep' files, etc.
Rewrite a lot of the code to improve the readability
(add comments, use subroutines, better variable names).
Also fix a couple of bugs:
- generate_dependencies was using the transitive implementation
dependencies rather than the transitive interface dependencies
to compute the `.int3' dependencies when writing `.d' files
(this bug was introduced during crs's changes to support
`.trans_opt' files)
- when creating the `.int' file, it was reading in the
interfaces for modules imported in the implementation section,
not just those in the interface section.
This meant that the compiler missed a lot of errors.
library/graph.m:
library/lexer.m:
library/term.m:
library/term_io.m:
library/varset.m:
compiler/*.m:
Add `:- import_module' declarations to the interface needed
by declarations in the interface. (The previous version
of the compiler did not detect these missing interface imports,
due to the above-mentioned bug in modules.m.)
compiler/mercury_compile.m:
compiler/intermod.m:
Change mercury_compile__maybe_grab_optfiles and
intermod__grab_optfiles so that they grab the opt files for
parent modules as well as the ones for imported modules.
compiler/mercury_compile.m:
Minor changes to handle parent module dependencies.
(Also improve the wording of the warning about trans-opt
dependencies.)
compiler/make_hlds.m:
compiler/module_qual.m:
Ignore `:- include_module' declarations.
compiler/module_qual.m:
A couple of small changes to handle nested module names.
compiler/prog_out.m:
compiler/prog_util.m:
Add new predicates string_to_sym_name/3 (prog_util.m) and
sym_name_to_string/{2,3} (prog_out.m).
compiler/*.m:
Replace many occurrences of `string' with `module_name'.
Change code that prints out module names or converts
them to strings or filenames to handle the fact that
module names are now sym_names intead of strings.
Also change a few places (e.g. in intermod.m, hlds_module.m)
where the code assumed that any qualified symbol was
fully-qualified.
compiler/prog_io.m:
compiler/prog_io_goal.m:
Move sym_name_and_args/3, parse_qualified_term/4 and
parse_qualified_term/5 preds from prog_io_goal.m to prog_io.m,
since they are very similar to the parse_symbol_name/2 predicate
already in prog_io.m. Rewrite these predicates, both
to improve maintainability, and to handle the newly
allowed syntax (module-qualified module names).
Rename parse_qualified_term/5 as `parse_implicit_qualified_term'.
compiler/prog_io.m:
Rewrite the handling of `:- module' and `:- end_module'
declarations, so that it can handle nested modules.
Add code to parse `include_module' declarations.
compiler/prog_util.m:
compiler/*.m:
Add new predicates mercury_public_builtin_module/1 and
mercury_private_builtin_module/1 in prog_util.m.
Change most of the hard-coded occurrences of "mercury_builtin"
to call mercury_private_builtin_module/1 or
mercury_public_builtin_module/1 or both.
compiler/llds_out.m:
Add llds_out__sym_name_mangle/2, for mangling module names.
compiler/special_pred.m:
compiler/mode_util.m:
compiler/clause_to_proc.m:
compiler/prog_io_goal.m:
compiler/lambda.m:
compiler/polymorphism.m:
Move the predicates in_mode/1, out_mode/1, and uo_mode/1
from special_pred.m to mode_util.m, and change various
hard-coded definitions to instead call these predicates.
compiler/polymorphism.m:
Ensure that the type names `type_info' and `typeclass_info' are
module-qualified in the generated code. This avoids a problem
where the code generated by polymorphism.m was not considered
type-correct, due to the type `type_info' not matching
`mercury_builtin:type_info'.
compiler/check_typeclass.m:
Simplify the code for check_instance_pred and
get_matching_instance_pred_ids.
compiler/mercury_compile.m:
compiler/modules.m:
Disallow directory names in command-line arguments.
compiler/options.m:
compiler/handle_options.m:
compiler/mercury_compile.m:
compiler/modules.m:
Add a `--make-private-interface' option.
The private interface file `<module>.int0' contains
all the declarations in the module; it is used for
compiling sub-modules.
scripts/Mmake.rules:
scripts/Mmake.vars.in:
Add support for creating `.int0' and `.date0' files
by invoking mmc with `--make-private-interface'.
doc/user_guide.texi:
Document `--make-private-interface' and the `.int0'
and `.date0' file extensions.
doc/reference_manual.texi:
Document nested modules.
util/mdemangle.c:
profiler/demangle.m:
Demangle names with multiple module qualifiers.
tests/general/Mmakefile:
tests/general/string_format_test.m:
tests/general/string_format_test.exp:
tests/general/string__format_test.m:
tests/general/string__format_test.exp:
tests/general/.cvsignore:
Change the `:- module string__format_test' declaration in
`string__format_test.m' to `:- module string_format_test',
because with the original declaration the `__' was taken
as a module qualifier, which lead to an error message.
Hence rename the file accordingly, to avoid the warning
about file name not matching module name.
tests/invalid/Mmakefile:
tests/invalid/missing_interface_import.m:
tests/invalid/missing_interface_import.err_exp:
Regression test to check that the compiler reports
errors for missing `import_module' in the interface section.
tests/invalid/*.err_exp:
tests/warnings/unused_args_test.exp:
tests/warnings/unused_import.exp:
Update the expected diagnostics output for the test cases to
reflect a few minor changes to the warning messages.
tests/hard_coded/Mmakefile:
tests/hard_coded/parent.m:
tests/hard_coded/parent.child.m:
tests/hard_coded/parent.exp:
tests/hard_coded/parent2.m:
tests/hard_coded/parent2.child.m:
tests/hard_coded/parent2.exp:
Two simple tests case for the use of nested modules with
separate compilation.
Estimated hours taken: 1.5
error_util:
Instead of requiring the writer of error messages to provide a list
of words, allow them to provide strings that the code in this module
will break down into words at white space. (They can still provide
words not to be proken down.)
term_errors:
Use the new flexibility in error_util to make the code preparing
error messages to read a lot better.
Estimated hours taken: 0.5
compiler/term_errors.m:
Fix one bug and work around another.
- The error messages said "... in the recursive call _at_ p/3 at
line 42 ...", instead of "... in the recursive call _to_ p/3 at
line 42 ...".
- When compiling library/relation.m with --trans-opt-int enabled,
one of the sanity checks in the error message printing failed.
I've just commented it out, since getting the error message is
more useful than a call to error/1.
Estimated hours taken: 0.75
compiler/bytecode.m:
compiler/code_util.m:
compiler/const_prop.m:
compiler/hlds_out.m:
compiler/intermod.m:
compiler/llds_out.m:
compiler/make_hlds.m:
compiler/mercury_to_c.m:
compiler/modes.m:
compiler/special_pred.m:
compiler/term_errors.m:
compiler/trace.m:
Delete all the obsolete code using magic numbers (e.g. 10000)
for proc_ids. This old hack, whereby make_hlds.m assigned
mode numbers based on the priority given to the determinism of
each mode, is not needed anymore. It is no longer needed
because modecheck_call.m now chooses the mode that is the best
fit (based on a variety of factors) rather than just picking
the first allowable mode.
tests/invalid/duplicate_modes.err_exp:
The output for this test changed, in insignificant ways:
the order in which it reported the duplicates modes changed,
because the mode numbers had changed.
Estimated hours taken: 0.5
compiler/term_errors.m:
Fix some bugs:
- when printing out the mode number, it needs
to take it mod 10000 to strip off the "priority".
- In some cases, termination analysis infers that a procedure
can loop, but the list of reasons why is empty.
This should never happen, and so term_errors.m was calling
error/1 in this situation, but in practice it does happen,
so I've changed term_errors.m to print out an error message
with "for unknown reason(s)" in that case.
We still ought to fix the problem, but this change at least
makes it easier to track down, since the error message says
which procedure the problem is occuring for.
Estimated hours taken: 0.75
library/*.m:
compiler/*.m:
Undo Zoltan's bogus update of all the copyright dates.
The dates in the copyright header should reflect the years
in which the file was modified (and no, changes to the
copyright header itself don't count as modifications).
Estimated hours taken: 60
A rewrite of termination analysis to make it significantly easier to modify,
and to extend its capabilities.
compiler/error_util.m:
A new file containing code that makes it easier to generate
nicely formatted error messages.
compiler/termination.m:
Updates to reflect the changes to the representation of termination
information.
Instead of doing pass 1 on all SCCs and then pass 2 on all SCCs,
we now do both pass 1 and 2 on an SCC before moving on to the next.
Do not insist that either all procedures in an SCC are
compiler-generated or all are user-written, since this need not be
true in the presence of user-defined equality predicates.
Clarify the structure of the code that handles builtins and compiler
generated predicates.
Concentrate all the code for updating module_infos in this module.
Previously it was scattered in several places in several files.
Put all the code for writing out termination information at the
end of the module in a logical order.
compiler/term_traversal.m:
A new file containing code used by both pass 1 and pass 2 to
traverse procedure bodies.
compiler/term_pass1.m:
Use the new traversal module.
Clarify the fixpoint computation on the set of output supplier
arguments.
Remove duplicates from the list of equations given to the solver.
This avoids a det stack overflow in lp.m when doing termination
analysis on options.m.
If an output argument of a predicate makes sense only in the absence
of errors, then return it only in the absence of errors.
compiler/term_pass2.m:
Use the new traversal module. Unlike the previous code, this allows us
to ignore recursive calls with input arguments bigger than the head
if those calls occur after goals that cannot succeed (since those
calls will never be reached).
Implement a better way of doing single argument analysis, which
(unlike the previous version) works in the presence of mutual recursion
and other calls between the recursive call and the start of the clause.
Implement a more precise way of checking for recursions that don't
cause termination problems. We now allow calls from p to q in which
the recursive input supplier arguments can grow, provided that on
any path on which q can call p, directly or indirectly, the recursive
input supplier arguments shrink by a greater amount.
If an output argument of a predicate makes sense only in the absence
of errors, then return it only in the absence of errors.
compiler/term_util.m:
Updates to reflect the changes to the representation of termination
information.
Reorder to put related code together.
Change the interface of several predicates to better reflect the
way they are used.
Add some more utility predicates.
compiler/term_errors.m:
Small changes to the set of possible errors, and major changes in
the way the messages are printed out (we now use error_util).
compiler/options.m:
Change --term-single-arg from being a bool to an int option,
whose value indicates the maximum size of an SCC in which we try
single argument analysis. (Large SCCs can cause single-arg analysis
to require a lot of iterations.)
Add an (int) option that controls the max number of paths
that we are willing to analyze (analyzing too many paths can cause
det stack overflow).
Add an (int) option that controls the max number of causes of
nontermination that we print out.
compiler/hlds_pred.m:
Use two separate slots in the proc_info to hold argument size data
and termination info, instead of the single slot used until now.
The two kinds of information are produced and used separately.
Make the layout of the get and set procedures for proc_infos more
regular, to facilitate later updates.
The procedures proc_info_{,set_}variables did the same work as
proc_info_{,set_}varset. To eliminate potential confusion, I
removed the first set.
compiler/*.m:
Change proc_info_{,set_}variables to proc_info_{,set_}varset.
compiler/hlds_out.m:
compiler/make_hlds.m:
compiler/mercury_to_mercury.m:
Change the code to handle the arg size data and the termination
info separately.
compiler/prog_data.m:
Change the internal representation of termination_info pragmas to
hold the arg size data and the termination info separately.
compiler/prog_io_pragma.m:
Change the external representation of termination_info pragmas to
group the arg size data together with the output supplier data,
to which it is logically connected.
compiler/module_qual.m:
compiler/modules.m:
Change the code to accommodate the change to the internal
representation of termination_info pragmas.
compiler/notes/compiler_design.html:
Fix some documentation rot, and clarify some points.
Document termination analysis.
doc/user_guide.texi:
Document --term-single-arg and the new options.
Remove spaces from the ends of lines.
library/bag.m:
Add a new predicate, bag__least_upper_bound.
Fix code that would do the wrong thing if executed by Prolog.
Remove spaces from the ends of lines.
library/list.m:
Add a new predicate, list__take_upto.
library/set{,_ordlist}.m:
Add a new predicate, set{,_ordlist}__count.
tests/term/*:
A bunch of new test cases to test the behaviour of termination
analysis. They are the small benchmark suite from our paper.
tests/Mmakefile:
Enable the new test case directory.
Estimated hours taken: 35
Modify termination analysis to use a linear inequation solver
written in Mercury rather than invoking an external 3rd party one.
compiler/term_pass1.m:
Remove all the code for writing out the system of equations,
invoking the solver and parsing the output.
Add code to convert the system of equations into the format
expected by the solver, and call the solver.
compiler/term_errors.m:
the 'lpsolve_failed' constructor goes from arity 1 to arity 0.
modify the output of error messages accordingly.
compiler/lp.m:
NEW file. Contains the linear inequation solver based on
the standard simplex method.
Estimated hours taken: 500
Add termination analysis to the compiler. The termination analysis
annotates each procinfo structure with termination information stating
whether each procedure is guaranteed to terminate.
Add transitive intermodule optimization to the compiler. Transitive
intermodule optimization uses .trans_opt files to store optimization
information. The difference between .trans_opt files and .opt files is
that .trans_opt files may depend on other .trans_opt files, whereas .opt
files may only depend on a .m file.
compiler/termination.m:
New file. The main module which controls the termination
analysis.
compiler/term_pass1.m:
New file. This file implements the first pass of the
termination analysis which attempts to derive relationships
between the relative sizes of variables. This information is
used by term_pass2.m
compiler/term_pass2.m:
New file. The second pass of the termination analysis attempts
to prove that each predicate or function in the program is
guaranteed to terminate.
compiler/term_util.m:
New file. Contains utilities which are used in various stages
of the termination analysis.
compiler/term_errors.m:
New file. Contains predicates for printing out error messages
produced by termination analysis.
compiler/trans_opt.m:
New file. This module contains predicates for both reading in
and writing .trans_opt files.
compiler/globals.m:
compiler/handle_options.m:
compiler/options.m:
Various modifications to handle the new options. Some of the
new options imply other options, and the `--termination-norm'
option is a string option which needs processing.
compiler/hlds_goal.m:
Added a comment that the list(uni_mode) subfield of construct,
and the unify_mode subfield of unify are not necessarily valid
when the unification applies to higher order terms.
compiler/hlds_out.m:
Added code to output termination information, as well as code to
print out the new markers.
compiler/hlds_pred.m:
Added the termination subfield to the proc_info structure and
added code to support it. Also added support for the new
markers.
compiler/make_hlds.m:
compiler/mercury_to_mercury.m:
compiler/module_qual.m:
compiler/modules.m:
compiler/prog_io_pragma.m:
Added support for the new pragmas, `termination_info',
`teminates', `check_termination' and `does_not_terminate'.
compiler/prog_data.m:
Added the new pragmas to the pragma_type. Also reformatted the
type declarations to conform with the coding specifications.
compiler/prog_io.m:
Reformatted some code and comments.
compiler/mercury_compiler.m:
Added code to call the termination analyser and to call the
predicate which creates .trans_opt files.
doc/reference_manual.texi:
Documented the termination analysis and the new pragmas.
doc/user_guide.texi:
Documented the new options.
