Estimated hours taken: 50
Add support for nested modules.
- module names may themselves be module-qualified
- modules may contain `:- include_module' declarations
which name sub-modules
- a sub-module has access to all the declarations in the
parent module (including its implementation section).
This support is not yet complete; see the BUGS and LIMITATIONS below.
LIMITATIONS
- source file names must match module names
(just as they did previously)
- mmc doesn't allow path names on the command line any more
(e.g. `mmc --make-int ../library/foo.m').
- import_module declarations must use the fully-qualified module name
- module qualifiers must use the fully-qualified module name
- no support for root-qualified module names
(e.g. `:parent:child' instead of `parent:child').
- modules may not be physically nested (only logical nesting, via
`include_module').
BUGS
- doesn't check that the parent module is imported/used before allowing
import/use of its sub-modules.
- doesn't check that there is an include_module declaration in the
parent for each module claiming to be a child of that parent
- privacy of private modules is not enforced
-------------------
NEWS:
Mention that we support nested modules.
library/ops.m:
library/nc_builtin.nl:
library/sp_builtin.nl:
compiler/mercury_to_mercury.m:
Add `include_module' as a new prefix operator.
Change the associativity of `:' from xfy to yfx
(since this made parsing module qualifiers slightly easier).
compiler/prog_data.m:
Add new `include_module' declaration.
Change the `module_name' and `module_specifier' types
from strings to sym_names, so that module names can
themselves be module qualified.
compiler/modules.m:
Add predicates module_name_to_file_name/2 and
file_name_to_module_name/2.
Lots of changes to handle parent module dependencies,
to create parent interface (`.int0') files, to read them in,
to output correct dependencies information for them to the
`.d' and `.dep' files, etc.
Rewrite a lot of the code to improve the readability
(add comments, use subroutines, better variable names).
Also fix a couple of bugs:
- generate_dependencies was using the transitive implementation
dependencies rather than the transitive interface dependencies
to compute the `.int3' dependencies when writing `.d' files
(this bug was introduced during crs's changes to support
`.trans_opt' files)
- when creating the `.int' file, it was reading in the
interfaces for modules imported in the implementation section,
not just those in the interface section.
This meant that the compiler missed a lot of errors.
library/graph.m:
library/lexer.m:
library/term.m:
library/term_io.m:
library/varset.m:
compiler/*.m:
Add `:- import_module' declarations to the interface needed
by declarations in the interface. (The previous version
of the compiler did not detect these missing interface imports,
due to the above-mentioned bug in modules.m.)
compiler/mercury_compile.m:
compiler/intermod.m:
Change mercury_compile__maybe_grab_optfiles and
intermod__grab_optfiles so that they grab the opt files for
parent modules as well as the ones for imported modules.
compiler/mercury_compile.m:
Minor changes to handle parent module dependencies.
(Also improve the wording of the warning about trans-opt
dependencies.)
compiler/make_hlds.m:
compiler/module_qual.m:
Ignore `:- include_module' declarations.
compiler/module_qual.m:
A couple of small changes to handle nested module names.
compiler/prog_out.m:
compiler/prog_util.m:
Add new predicates string_to_sym_name/3 (prog_util.m) and
sym_name_to_string/{2,3} (prog_out.m).
compiler/*.m:
Replace many occurrences of `string' with `module_name'.
Change code that prints out module names or converts
them to strings or filenames to handle the fact that
module names are now sym_names intead of strings.
Also change a few places (e.g. in intermod.m, hlds_module.m)
where the code assumed that any qualified symbol was
fully-qualified.
compiler/prog_io.m:
compiler/prog_io_goal.m:
Move sym_name_and_args/3, parse_qualified_term/4 and
parse_qualified_term/5 preds from prog_io_goal.m to prog_io.m,
since they are very similar to the parse_symbol_name/2 predicate
already in prog_io.m. Rewrite these predicates, both
to improve maintainability, and to handle the newly
allowed syntax (module-qualified module names).
Rename parse_qualified_term/5 as `parse_implicit_qualified_term'.
compiler/prog_io.m:
Rewrite the handling of `:- module' and `:- end_module'
declarations, so that it can handle nested modules.
Add code to parse `include_module' declarations.
compiler/prog_util.m:
compiler/*.m:
Add new predicates mercury_public_builtin_module/1 and
mercury_private_builtin_module/1 in prog_util.m.
Change most of the hard-coded occurrences of "mercury_builtin"
to call mercury_private_builtin_module/1 or
mercury_public_builtin_module/1 or both.
compiler/llds_out.m:
Add llds_out__sym_name_mangle/2, for mangling module names.
compiler/special_pred.m:
compiler/mode_util.m:
compiler/clause_to_proc.m:
compiler/prog_io_goal.m:
compiler/lambda.m:
compiler/polymorphism.m:
Move the predicates in_mode/1, out_mode/1, and uo_mode/1
from special_pred.m to mode_util.m, and change various
hard-coded definitions to instead call these predicates.
compiler/polymorphism.m:
Ensure that the type names `type_info' and `typeclass_info' are
module-qualified in the generated code. This avoids a problem
where the code generated by polymorphism.m was not considered
type-correct, due to the type `type_info' not matching
`mercury_builtin:type_info'.
compiler/check_typeclass.m:
Simplify the code for check_instance_pred and
get_matching_instance_pred_ids.
compiler/mercury_compile.m:
compiler/modules.m:
Disallow directory names in command-line arguments.
compiler/options.m:
compiler/handle_options.m:
compiler/mercury_compile.m:
compiler/modules.m:
Add a `--make-private-interface' option.
The private interface file `<module>.int0' contains
all the declarations in the module; it is used for
compiling sub-modules.
scripts/Mmake.rules:
scripts/Mmake.vars.in:
Add support for creating `.int0' and `.date0' files
by invoking mmc with `--make-private-interface'.
doc/user_guide.texi:
Document `--make-private-interface' and the `.int0'
and `.date0' file extensions.
doc/reference_manual.texi:
Document nested modules.
util/mdemangle.c:
profiler/demangle.m:
Demangle names with multiple module qualifiers.
tests/general/Mmakefile:
tests/general/string_format_test.m:
tests/general/string_format_test.exp:
tests/general/string__format_test.m:
tests/general/string__format_test.exp:
tests/general/.cvsignore:
Change the `:- module string__format_test' declaration in
`string__format_test.m' to `:- module string_format_test',
because with the original declaration the `__' was taken
as a module qualifier, which lead to an error message.
Hence rename the file accordingly, to avoid the warning
about file name not matching module name.
tests/invalid/Mmakefile:
tests/invalid/missing_interface_import.m:
tests/invalid/missing_interface_import.err_exp:
Regression test to check that the compiler reports
errors for missing `import_module' in the interface section.
tests/invalid/*.err_exp:
tests/warnings/unused_args_test.exp:
tests/warnings/unused_import.exp:
Update the expected diagnostics output for the test cases to
reflect a few minor changes to the warning messages.
tests/hard_coded/Mmakefile:
tests/hard_coded/parent.m:
tests/hard_coded/parent.child.m:
tests/hard_coded/parent.exp:
tests/hard_coded/parent2.m:
tests/hard_coded/parent2.child.m:
tests/hard_coded/parent2.exp:
Two simple tests case for the use of nested modules with
separate compilation.
Estimated hours taken: 0.75
library/*.m:
compiler/*.m:
Undo Zoltan's bogus update of all the copyright dates.
The dates in the copyright header should reflect the years
in which the file was modified (and no, changes to the
copyright header itself don't count as modifications).
Estimated hours taken: 40 (+ unknown time by Zoltan)
Add support for memory profiling.
(A significant part of this change is actuallly Zoltan's work. Zoltan
did the changes to the compiler and a first go at the changes to the
runtime and library. I rewrote much of Zoltan's changes to the runtime
and library, added support for the new options/grades, added code to
interface with mprof, did the changes to the profiler, and wrote the
documentation.)
[TODO: add test cases.]
NEWS:
Mention support for memory profiling.
runtime/mercury_heap_profile.h:
runtime/mercury_heap_profile.c:
New files. These contain code to record heap profiling information.
runtime/mercury_heap.h:
Add new macros incr_hp_msg(), tag_incr_hp_msg(),
incr_hp_atomic_msg(), and tag_incr_hp_atomic_msg().
These are like the non-`msg' versions, except that if
PROFILE_MEMORY is defined, they also call MR_record_allocation()
from mercury_heap_profile.h to record heap profiling information.
Also, fix up the indentation in lots of places.
runtime/mercury_prof.h:
runtime/mercury_prof.c:
Added code to dump out memory profiling information to files
`Prof.MemoryWords' and `Prof.MemoryCells' (for use by mprof).
Change the format of the `Prof.Counts' file so that the
first line says what it is counting, the units, and a scale
factor. Prof.MemoryWords and Prof.MemoryCells can thus have
exactly the same format as Prof.Counts.
Also cleaned up the interface to mercury_prof.c a bit, and did
various other minor cleanups -- indentation changes, changes to
use MR_ prefixes, additional comments, etc.
runtime/mercury_prof_mem.h:
runtime/mercury_prof_mem.c:
Rename prof_malloc() as MR_prof_malloc().
Rename prof_make() as MR_PROF_NEW() and add MR_PROF_NEW_ARRAY().
runtime/mercury_wrapper.h:
Minor modifications to reflect the new interface to mercury_prof.c.
runtime/mercury_wrapper.c:
runtime/mercury_label.c:
Rename the old `-p' (primary cache size) option as `-C'.
Add a new `-p' option to disable profiling.
runtime/Mmakefile:
Add mercury_heap_profile.[ch].
Put the list of files in alphabetical order.
Delete some obsolete stuff for supporting `.mod' files.
Mention that libmer_dll.h and libmer_globals.h are
produced by Makefile.DLLs.
runtime/mercury_imp.h:
Mention that libmer_dll.h is produced by Makefile.DLLs.
runtime/mercury_dummy.c:
Change a comment to refer to libmer_dll.h rather than
libmer_globals.h.
compiler/llds.m:
Add a new field to `create' and `incr_hp' instructions
holding the name of the type, for heap profiling.
compiler/unify_gen.m:
Initialize the new field of `create' instructions with
the appropriate type name.
compiler/llds_out.m:
Output incr_hp_msg() / tag_incr_hp_msg() instead of
incr_hp() / tag_incr_hp().
compiler/*.m:
Minor changes to most files in the compiler back-end to
accomodate the new field in `incr_hp' and `create' instructions.
library/io.m:
Add `io__report_full_memory_stats'.
library/benchmarking.m:
Add `report_full_memory_stats'. This uses the information saved
by runtime/mercury_heap_profile.{c,h} to print out a report
of memory usage by procedures and by types.
Also modify `report_stats' to print out some of that information.
compiler/mercury_compile.m:
If `--statistics' is enabled, call io__report_full_memory_stats
at the end of main/2. This will print out full memory statistics,
if the compiler was compiled with memory profiling enabled.
compiler/options.m:
compiler/handle_options.m:
runtime/mercury_grade.h:
scripts/ml.in:
scripts/mgnuc.in:
scripts/init_grade_options.sh-subr:
scripts/parse_grade_options.sh-subr:
Add new option `--memory-profiling' and new grade `.memprof'.
Add `--time-profiling' as a new synonym for `--profiling'.
Also add `--profile-memory' for more fine-grained control:
`--memory-profiling' implies both `--profile-memory' and
`--profile-calls'.
scripts/mprof_merge_runs:
Update to handle the new format of Prof.Counts and to
also merge Prof.MemoryWords and Prof.MemoryCells.
profiler/options.m:
profiler/mercury_profile.m:
Add new options `--profile memory-words' (`-m'),
`--profile memory-cells' (`-M') and `--profile time' (`-t').
Thes options make the profiler select a different count file,
Prof.MemoryWords or Prof.MemoryCells instead of Prof.Counts.
specific to time profiling.
profiler/read.m:
profiler/process_file.m:
profiler/prof_info.m:
profiler/generate_output.m:
Update to handle the new format of the counts file.
When reading the counts file, look at the first line of
the file to determine what is being profiled.
profiler/globals.m:
Add a new global variable `what_to_profile' that records
what is being profiled.
profiler/output.m:
Change the headings to reflect what is being profiled.
doc/user_guide.texi:
Document memory profiling.
Document new options.
doc/user_guide.texi:
compiler/options.m:
Comment out the documentation for `.proftime'/`--profile-time',
since doing time and call profiling seperately doesn't work,
because the code addresses change when you recompile with a
different grade. Ditto for `.profmem'/`--profile-memory'.
Also comment out the documentation for
`.profcalls'/`--profile-calls', since it is redundant --
`.memprof' produces the same information and more.
configure.in:
Build a `.memprof' grade. (Hmm, should we do this only
if `--enable-all-grades' is specified?)
Don't ever build a `.profcalls' grade.
Estimated hours taken: 5
When generating code that raises trace events at runtime, trace not just
procedure calls, exits and failures, but also entries to switch arms,
disjunction arms and to the then and else parts of if-then-elses.
These new trace ports are exactly what is needed to let the trace analyzer
figure out what path execution took inside a procedure. (This includes
knowing at what point forward execution resumes after backtracking.)
The new ports correspond to the UNIFY port in the Opium debugger, which
signified entry to a clause.
These new ports complete the set of ports required for generating traces
whose information content is approximately equivalent to Opium (i.e. as
close to Opium functionality as we can get in Mercury).
compiler/trace.m:
Add code to handle the new ports.
compiler/hlds_goal.m:
Add an extra slot to each hlds_goal_info structure. This slot
holds information about the position of the goal within the
procedure, in the form of a description of the path from the
root of the main goal to this goal. This info is included in
the new trace ports. It is likely that this info will also be
used by optimizations (such as loop invariant removal) to be
implemented later.
compiler/goal_path.m:
A new module whose job it is to fill the new goal_info slot;
later it may also contain code to e.g. check whether one goal
is before, after, or parallel to another.
compiler/hlds_out.m:
Include the new slot in HLDS dumps.
compiler/mercury_compile.m:
Invoke code in goal_path.m to fill in the new slot just before
code generation when generating traces.
compiler/dense_switch.m:
compiler/disj_gen.m:
compiler/ite_gen.m:
compiler/string_switch.m:
compiler/switch_gen.m:
compiler/tag_switch.m:
Emit code for invoking the new trace ports.
runtime/mercury_trace.c:
runtime/mercury_trace.h:
Implement the new ports.
Estimated hours taken: 14
Implemented a :- use_module directive. This is the same as
:- import_module, except all uses of the imported items
must be explicitly module qualified.
:- use_module is implemented by ensuring that unqualified versions
of items only get added to the HLDS symbol tables if they were imported
using import_module.
Indirectly imported items (from `.int2' files) and items declared in `.opt'
files are treated as if they were imported with use_module, since all uses
of them should be module qualified.
compiler/module_qual.m
Keep two sets of type, mode and inst ids, those which can
be used without qualifiers and those which can't.
Renamed some predicates which no longer have unique names since
'__' became a synonym for ':'.
Made mq_info_set_module_used check whether the current item is in
the interface, rather than relying on its caller to do the check.
Removed init_mq_info_module, since make_hlds.m now uses the
mq_info built during the module qualification pass.
compiler/prog_data.m
Added a pseudo-declaration `used', same as `imported' except uses of
the following items must be module qualified.
Added a type need_qualifier to describe whether uses of an item
need to be module qualified.
compiler/make_hlds.m
Keep with the import_status whether current item was imported
using a :- use_module directive.
Use the mq_info structure passed in instead of building a new one.
Ensure unqualified versions of constructors only get added to the
cons_table if they can be used without qualification.
compiler/hlds_module.m
Added an extra argument to predicate_table_insert of type
need_qualifier.
Only add predicates to the name and name-arity indices if they
can be used without qualifiers.
Changed the structure of the module-name-arity index, so that
lookups can be made without an arity, such as when type-checking
module qualified higher-order predicate constants. This does not
change the interface to the module_name_arity index.
Factored out some common code in predicate_table_insert which
applies to both predicates and functions.
compiler/hlds_pred.m
Removed the opt_decl import_status. It isn't needed any more
since all uses of items declared in .opt files must now be
module qualified.
Added some documentation about when the clauses_info is valid.
compiler/intermod.m
Ensure that predicate and function calls in the `.opt' file are
module qualified. Use use_module instead of import_module in
`.opt' files.
compiler/modules.m
Handle use_module directives.
Report a warning if both use_module and import_module declarations
exist for the same module.
compiler/mercury_compile.m
Collect inter-module optimization information before module
qualification, since it can't cause conflicts any more. This means
that the mq_info structure built in module_qual.m can be reused in
make_hlds.m, instead of building a new one.
compiler/prog_out.m
Add a predicate prog_out__write_module_list, which was moved
here from module_qual.m.
compiler/typecheck.m
Removed code to check that predicates declared in `.opt' files
were being used appropriately, since this is now handled by
use_module.
compiler/*.m
Added missing imports, mostly for prog_data and term.
NEWS
compiler/notes/todo.html
doc/reference_manual.texi
Document `:- use_module'.
tests/valid/intermod_lambda_test.m
tests/valid/intermod_lambda_test2.m
tests/invalid/errors.m
tests/invalid/errors2.m
Test cases.
Estimated hours taken: 3
Replace calls to map__set with calls to either map__det_insert or
map__det_update. In some cases this required a small amount of code
reorganization.
Estimated hours taken: 3
code_gen, pragma_c_code:
Move the code that generates code for pragma_c_codes to a new module.
llds:
Change the representation of reg and temp lvals, in order to create
the concept of a "register type" and to reduce memory requirements.
Also add a comment indicating a possible future extension dealing with
model_non pragma_c_codes.
code_exprn, code_info:
Add the ability to request registers of a given type, or a specific
register, when acquiring registers.
bytecode, bytecode_gen, call_gen, dupelim, exprn_aux, follow_vars, frameopt,
garbage_out, jumpopt, llds_out, middle_rec, opt_debug, opt_util, store_alloc,
string_switch, tag_switch, unify_gen, vn_block, vn_cost, vn_filter, vn_flush,
vn_order, vn_temploc, vn_type, vn_util, vn_verify:
Small changes to accommodate the new register representation.
hlds_goal:
Add a comment indicating a possible future extension dealing with
model_non pragma_c_codes.
inlining:
Add a comment indicating a how to deal with a possible future extension
dealing with model_non pragma_c_codes.
Estimated hours taken: _____
Take the code generator a big step closer to notes/ALLOCATION.
The new code generator emits code that is smaller and faster than
the code we used to emit.
Nondet liveness is no longer used; nondet live sets are always empty.
In code that was being modified anyway, remove its handling. Other
uses will be removed later (this keeps this change from being far too big;
as it is it is merely too big). Similarly for cont-lives.
In several places, clarify the code that gathers several code pieces together.
call_gen:
Unset the failure continuation and flush the resume vars to
their stack slots before nondet calls.
Move the code that decides whether a nondet call can be a tailcall
to code_info.
code_aux:
Remove the code to handle resume points, since these are now
handled in the specific constructs that need them. Replace it
with a sanity check.
code_exprn:
Add a predicate to place multiple vars.
code_gen:
Remove the predicate code_gen__generate_forced_goal, since it
packaged together some operations that should be executed at different
times.
Don't unset the failure continuation after every nondet goal;
this is now done in the constructs that need it.
Modify the handling of negation to use resume point info
according to notes/ALLOCATION.
Remove the predicate code_gen__ensure_vars_are_saved which was
use to save all lives variables to the stack before nondet
disjunctions and if-then-elses; we don't do that anymore.
code_info:
Significantly simplify and document the handling of failure
continuations, and make the types involved abstract types.
Factor out common code in the handling of det and semi commits.
Keep track of "zombies", variables that are dead wrt forward
execution but whose values we need because they may be needed
at a resume point we can reach.
Remove several now unneeded predicates, and introduce new
predicates to help other modules.
code_util:
Add a couple of predicates to check whether ia goal cannot fail before
flushing all variables to the stack, and whether a goal cannot flush
any variables to the stack. These are used in liveness to decide
which entry labels will be needed at resume points.
disj_gen:
Unify the handling of det and semi disjunctions. Model the code
handling of nondet disjunctions on the code handling pruned
disjunctions. It is possible that the handling of nondet and pruned
disjunctions can also be unified; the new code should make this
significantly easier.
Make the code conform to notes/ALLOCATION. This means saving
only the variables mentioned in the resume_point field, not
flushing all live variables to the stack at the start of a
nondet disjunction, handling zombies, and using the new method
of flushing variables at the ends of branched structures.
ite_gen:
Unify the handling of det and semi if-then-elses. Model the code
handling of nondet if-then-elses on the code handling det/semi
if-then-elses. It is possible that the handling of nondet and pruned
if-then-elses can also be unified; the new code should make this
significantly easier.
Make the code conform to notes/ALLOCATION. This means saving
only the variables mentioned in the resume_point field, not
flushing all live variables to the stack at the start of a
nondet if-then-else, handling zombies, and using the new method
of flushing variables at the ends of branched structures.
Apply the new rules about liveness in if-then-elses, which say that
the else part is parallel not to the then part but to the conjunction
of the condition and the then part.
dense_switch, lookup_switch, string_switch, switch_gen, tag_switch, middle_rec:
Use the new method of flushing variables at the ends of branched
structures. Don't call remake_with_store map; switch_gen will do so.
Fix an old bug in lookup_switch.
The code in switch_gen which looked for the special case of a two-way
switch used to use a heuristic to decide which one was recursive and
which one was a base case. We now check the codes of the cases.
hlds_goal:
Adjust the structure of the resume_point field to make it easier
to use. Add a more convenient access predicate.
hlds_out:
Don't print the nondet liveness and cont live fields, since they are
not used anymore. Comment out the printing of the context field,
which is rarely useful. Modify the printing of the resume_point field
to conform to its new definition.
live_vars:
Use the resume_point field, not the nondetlives field, to decide
which variables may be needed on backward execution. Remove some
code copied from liveness.m.
liveness:
Put the several pieces of information we thread through the traversal
predicates into a single tuple.
Don't put variables which are local to one branch of a branched
structure into the post-birth sets of other branches.
Apply the new rules about liveness in if-then-elses, which say that
the else part is parallel not to the then part but to the conjunction
of the condition and the then part. Variables that are needed in the
else part but not in the condition or the then part now die in at the
start of the condition (they will be protected by the resume point on
the condition).
We now treat pruned and non-pruned disjunctions the same way
wrt deadness; the old way was too conservative (it had to be).
We still mishandle branches which produce some variables but
can't succeed.
mercury_compile:
Liveness now prints its own progress message with -V; support this.
store_alloc:
When figuring out what variables need to be saved across calls,
make sure that we put in interference arcs between those variables
and those that are required by enclosing resume points.
Don't compute cont-lives, since they are not used anymore.
livemap:
Fix the starting comment.
Estimated hours taken: 2.5
Switch from using a stack of store_maps in the code_info to govern what
goes where at the end of each branched structure to using the store map
fields of the goal expressions of those structures.
Fix variable names where they resembled the wrong kind of map(var, lval).
code_info:
Remove the operations on stacks of store maps.
Modify the generate_forced_saves and remake_with_store_map operations
to take a store_map parameter.
When making variables magically live, pick random unused variables
to hold them, since we can no longer use the guidance of the top
store map stack entry. This may lead to the generation of some
excess move instructions at non-reachable points in the code;
this will be fixed later.
code_gen:
Remove the store map push and pop invocations.
Modify the generate_forced_goal operation to take a store_map parameter.
code_exprn:
Export a predicate for use by code_info.
middle_rec, disj_gen, ite_gen, switch_gen,
dense_switch, lookup_switch, string_switch, tag_switch:
Pass the store map around to get it to invocations of the primitives
in code_gen and code_info that now need it.
goal_util:
Name apart the new follow_vars field in hlds__goal_infos.
(This should have been in the change that introduced that field.)
common, constraint, cse_detection, det_analysis, dnf, excess, follow_code,
intermod, lambda, lco, liveness, make_hlds, mode_util, modes, polymorphism,
quantification, simplify, switch_detection, typecheck, unique_modes,
unused_args:
Fix variable names.
follow_vars, store_alloc:
Add comments.
Estimated hours taken: 15
hlds_data:
Rename address_const to code_addr_const, and add base_type_info_const
as a new alternative in cons_id, and make corresponding changes
to cons_tag.
Make hlds_type__defn an abstract type.
llds:
Rename address_const to code_addr_const, and add data_addr_const
as a new alternative in rval_const.
Change type "label" to have four alternatives, not three:
local/2 (for internal labels), c_local (local to a C module),
local/1 (local a Mercury module but not necessarily to a C module,
and exported.
llds_out:
Keep track of the things declared previously, and don't declare them
again unnecessarily. Associate indentation with the following item
rather than the previous item (the influence of 244); this results
in braces being put in different places than previously, but should be
easier to maintain. Handle the new forms of addresses and labels.
Refer to c_local labels as STATIC when not using --split-c-files.
code_info:
Use a presently junk field to store a cell counter, which is used
to allocate distinguishing numbers to create'd cells. Previously
we used the label counter, which meant that label numbers changed
when we optimized away some creates. Handle the new forms of
addresses and labels.
exprn_aux:
Handle the new forms of addresses and labels. We are now more
precise in figuring out what label address forms will be considered
constants by the C compilers.
others:
Changes to handle the new forms of addresses and labels, and/or to
access hlds_type__defn as an abstract type.
Estimated hours taken: 2
llds.m:
Add a boolean argument to the create rval, which should be set to true
if the cell created must have a unique reference.
vn_type.m:
Add a corresponding argument to vn_create.
others:
Fix references to creates and vn_creates.
Estimated hours taken: 0.5 hours for the fix, 8 hours debugging
(plus a similar amount of Zoltan's time debugging)
string_switch.m:
Fix a code generation bug: it called
code_info__generate_failure from the wrong spot, and so used
the wrong exprn_info. This meant that the code generated
by generate_failure contained incorrect register shuffling,
since it thought the variables were in different locations
to where they really were.
Estimated hours taken: 10
hlds, hlds_module, hlds_pred, hlds_goal, hlds_data:
Divided the old hlds.m into four files:
hlds_module.m defines the data structures that deal with issues
that are wider than a single predicate. These data structures are
the module_info structure, dependency_info, the predicate table
and the shape table.
hlds_pred.m defined pred_info and proc_info, pred_id and proc_id.
hlds_goal.m defines hlds__goal, hlds__goal_{expr,info}, and the
other parts of goal structures.
hlsd_data.m defines the HLDS types that deal with issues related
to data and its representation: function symbols, types, insts, modes.
It also defines the types related to determinism.
hlds.m is now an empty module. I have not removed it from CVS
because we may need the name hlds.m again, and CVS does not like
the reuse of a name once removed.
other modules:
Import the necessary part of hlds.
det_analysis:
Define a type that was up to now improperly defined in hlds.m.
prog_io:
Move the definition of type determinism to hlds_data. This decision
may need to be revisited when prog_io is broken up.
dnf, lambda:
Simplify the task of defining predicates.
llds:
Fix some comments.
mercury_compile:
If the option -d all is given, dump all HLDS stages.
shape, unused_args:
Fix formatting.
excess:
A new pass to remove unnecessary assignment unifications.
mercury_compile:
Call the new excess assignment module.
options:
Add a new option, excess_assign, to control the new optimization.
Add another, num-real-regs, to specify how many of r1, r2 etc are
actually real registers. The default is now set to 5 for kryten;
later it should be supplied by the mc script, with a value determined
at configuration time.
tag_switch:
Use num-real-regs to figure out whether it is likely to be worthwhile
to eliminate the common subexpression of taking the primary tag of
a variable. Also fix an old performance bug: the test for when a
jump table is worthwhile was reversed.
value_number, vn_block:
Do value numbering on extended basic blocks, not basic blocks.
vn_debug:
Modify an information message.
labelopt:
Clean up an export an internal predicate for value numbering. Replace
bintree_set with set.
middle_rec:
Prepare for the generalization of middle recursion optimization
to include predicates with an if-then-else structure.
cse_detection:
Fix a bug: when hoisting a common desconstruction X = f(Yi), create
new variables for the Yi. This avoids problems with any of the Yis
appearing in other branches of the code.
goal_util:
Add a new predicate for use by cse_detection.
common:
Fix a bug: recompute instmap deltas, since they may be affected by the
optimization of common structures.
code_info:
Make an error message more explicit.
det_analysis:
Restrict import list to the needed modules.
*.m:
Import assoc_list.
instructions, and the last argument from local labels. All these were
placeholders for info put in there by prof.m and used when emitting C
code.
The set of labels that serve as return points are now calculated in llds.m
just before each procedure has its C code generated. This set is passed to
output_instruction along with the label at the start of the procedure.
*.m:
Changed the way the extra field in the label type is defined. Now
all labels are initially assumed to be 'unknown' and a seperate
profiling pass (to be implemented) will determine whether the label can
be accessed externally.
prog_io, hlds: Added the functor "multidet" to the type determinism.
Added types and predicates to relate determinism to its
two components, can_fail and soln_count.
Removed the functor "unspecified" from the type determinism,
substituting maybe(determinism) for determinism in proc_info.
Replaced the type category with the type code_model,
and added predicates to compute it from determinism.
det_analysis: Redone the analyses to work with determinism, not category
(or code_model). This should enable programmers to write
their own erroneous (and failure) predicates.
other files: Use the new and renamed types and access predicates.
compiler/*:
Add copyright messages.
Change all occurences of *.nl in comments to *.m.
compiler/mercury_compile.pp:
Change the output to the .dep files to use *.m rather than *.nl.
(NOTE: this means that `mmake' will not work any more if you
call your files *.nl!!!)
exprn_aux.nl:
a new module for manipulating rvals and lvals.
code_exprn.nl:
the new bottom level of the new code generator. This replaces
a large chunk of code_info.
*code* & *gen*:
various small changes to use the new bottom level of the
code generator.
io.nl:
Introduced a new predicate which ignore's any whitespace in the input.
Needs to have all the whitespace character's added to it.
*.nl and *.pp:
Changed the implementation of time profiling. Now during a compile,
the compiler identifies all the internal labels which can be accessed
externally, and marks them. At the moment, these are the continuation
labels of calls and the next disjunct in nondet disjunctions. Then
at the .mod output, it places a macro 'update_prof_current_proc' to
restore the profiling counter.
llds.nl:
Introduced an extra argument to the LLDS goto. It is the label
address of the Caller and is used for the profiling of tailcall's.
*.nl and *.pp:
Propagated the extra argument to all the appropiate files.
Makefile.common:
Add new targets `mercury_compile.sicstus' (the Mercury compiler
compiled with Sicstus) and `mercury_compile.sicstus.debug'
(debugging version of the above).
*.nl:
Use Sicstus-compatible char and string escapes.
Avoid the use of explicit existential quantification.
Various other hacks to get things to parse correctly under Sicstus.
prog_io.nl:
Don't allow (A -> B) in DCGs, since NU-Prolog and Mercury give
it different semantics to Sicstus.
sp_builtin.nl, sp_lib.nl:
Split sp_builtin.nl into sp_builtin.nl and sp_lib.nl.
sp_conv.sed:
Add sed script which converts some character escapes so that
they work with Sicstus.
term_io.nl:
Remove term_io__prefix_op etc. since they aren't used anymore.
now in dense_switch, string_switch and tag_switch, with the original
if-then-else implementation and the code that decides on optimizations
still in switch_gen.
Added options to replace the magic numbers governing the choice of switch
method.
Added comments to frameopt, jumpopt, labelopt and peephole.
