Replace __ with . as the module qualifier symbol.
Replace references to io.state with just io.
Replace DCGs with state variables.
Replace (C->T;E) syntax for if-then-elses with (if C then T else E) syntax.
Replace if-then-elses with switches when possible and where this does not
affect what is being tested.
Replace separate pred and mode declarations with predmode declarations.
Put predicate and function declarations just before the definition
of the predicate or function.
Delete unneeded module qualifications on predicate and function declarations
and definitions.
Update .exp files (and if needed, .inp files) for the line number changes
that result from the above.
For tests that have more than one .exp file and where one of those files
is affected by the above, add a section to the source file header that says
which .exp file is for what grade, with XXXs for the (as yet) unknown parts.
tests/accumulator/*.m:
tests/analysis_*/*.m:
tests/benchmarks*/*.m:
tests/debugger*/*.{m,exp,inp}:
tests/declarative_debugger*/*.{m,exp,inp}:
tests/dppd*/*.m:
tests/exceptions*/*.m:
tests/general*/*.m:
tests/grade_subdirs*/*.m:
tests/hard_coded*/*.m:
Make these tests use four-space indentation, and ensure that
each module is imported on its own line. (I intend to use the latter
to figure out which subdirectories' tests can be executed in parallel.)
These changes usually move code to different lines. For the debugger tests,
specify the new line numbers in .inp files and expect them in .exp files.
pragmas but it now emits an error message saying what pragma in the "new"
foreign language interface to use instead. (That will be deleted after the
next release.)
Remove support for nondet foreign code from the implementation.
Add some bits from the old C interface chapter of the reference manual,
about linking with C object files and the c_pointer type, to the chapter
on the foreign language interface; delete the rest.
Add an illustration of simulating nondet foreign code with Mercury clauses
and (semi)deterministic foreign_procs.
doc/reference_manual.texi:
Delete the old C interface chapter.
Add a section on linking against C object files to the C specific
section of the foreign language interface chapter. (The old version of
this was quite mmake-specific, the new version attempts to minimise
this.)
Mention the c_pointer type in section on C foreign types.
Mention that nondet foreign_procs are not allowed. Give an example
to use foreign code and nondeterminism.
compiler/prog_io_pragma.m:
Emit error messages when any of the pragmas used by the old C interface
are encountered.
compiler/prog_item.m:
Delete the parse tree representation of import pragmas.
compiler/gcc.m:
Replace `:- pragma import' declarations with `:- pragma foreign_proc'
declarations for C.
compiler/add_heap_ops.m:
compiler/add_trail_ops.m:
compiler/add_pragma.m:
compiler/deep_profiling.m:
compiler/det_analysis.m:
compiler/equiv_type.m:
compiler/erl_call_gen.m:
compiler/foreign.m:
compiler/goal_util.m:
compiler/hlds_out_goal.m:
compiler/make_hlds_passes.m:
compiler/make_hlds_warn.m:
compiler/mercury_to_mercury.m
compiler/ml_code_gen.m:
compiler/module_qual.m:
compiler/modules.m:
compiler/polymorphism.m:
compiler/pragma_c_gen.m:
compiler/proc_gen.m:
compiler/prog_data.m:
compiler/recompilation.version.m:
Delete stuff related the old C interface.
tests/hard_coded_Mmakefile:
tests/hard_coded/inline_nondet_pragma_c.*:
tests/hard_coded/nondet_c.*:
tests/hard_coded/nondet_pragma_c_bug.*:
tests/hard_coded/pragma_import.*:
Delete these tests. The features they exercise are no longer
supported.
tests/*/*.m:
Replace uses of the old C interface with the new.
Estimated hours taken: 40
Branches: main
A large step towards declarative debugging of goals that do I/O. This step
does everything needed for that except modify the declarative debugger itself;
that is for Mark to do.
If you give the new option --trace-table-io-decl, the transformation performed
by the compiler on I/O primitives will preserve not just the output arguments
of the primitive, so that the primitive can be "reexecuted" without performing
any side-effects, but also the input arguments and the identity of the I/O
primitive itself. The I/O table therefore will contain a list of the I/O
primitives executed by the program after I/O tabling is started.
You can test this via the new debugger commands "print action <action-number>"
and "browse action <action-number>".
The new option is currently not documented, because the declarative debugger
does not yet use the information it provides. The new debugger commands are
not documented because they are meant only for implementors, at least for
now.
Since this change adds a field to proc_layout structures, any workspaces
compiled with debugging enabled will need to do a cvs update when this change
is installed.
compiler/options.m:
Add the option --trace-table-io-decl. When set, this causes the
compiler to transform I/O action primitives to allow declarative
debugging of I/O actions.
compiler/handle_options.m:
Make --trace-table-io-decl imply --trace-table-io.
compiler/table_gen.m:
Perform the transformation, which is similar to the existing
--trace-table-io transformation, but preserves the identity of all
non-io-state arguments (not just the outputs) and the identity
of the I/O primitive itself.
Provide better names for variables generated by tabling
transformations.
compiler/hlds_goal.m:
Add extra parameters to procedures whose job it is to create new
goals to name the variables in those goals.
compiler/layout.m:
Add a new layout structure to contain the information the runtime
system needs to interpret the information saved by the new
transformation.
compiler/layout_out.m:
Output the new layout structure.
compiler/continuation_info.m:
Add a field to proc_layouts to point to the declarative I/O tabling
structure, and another to identify the proc_layout without using LLDS
types.
compiler/code_gen.m:
Provide the definition of this field when appropriate.
compiler/hlds_pred.m:
Add a field to proc_infos to store the information from the tabling
transformation until code generation.
compiler/stack_layout.m:
Add a mechanism for transforming the high level description of I/O
action tabling data in proc_infos to the low level description we need
to generate C data structures.
compiler/hlds_data.m:
Add a new cons_id and a new cons_tag; they are used to refer to I/O
tabling structures in code generated by the new transformation.
compiler/*.m:
Handle the updates to global data types above.
library/table_builtin.m:
Modernize some old code.
Fix an old off-by-one error: make I/O tabling use the first slot
in the I/O action table.
library/varset.m:
Add a mechanism for creating a variable that is named iff the caller
has a name for it.
runtime/mercury_layout_util.[ch]:
Add a function for materializing type parameters from an answer block,
not from registers or a closure.
runtime/mercury_stack_layout.h:
Declare a C type for the data structure holding information about
I/O primitives transformed by --trace-table-io-decl, and add a field
to proc_layout structures to point to these new structures.
Add a new evaluation method for --trace-table-io-decl.
runtime/mercury_tabling_macros.h:
Add some conditionally-compiled debugging code to the primitive for
saving answers.
trace/mercury_trace_vars.[ch]:
Add functions for printing I/O action goals.
trace/mercury_trace_internal.c:
Add code for recognizing and implementing commands to print I/O
action goals.
trace/mercury_trace.c:
Add code for handling the new eval method.
tests/debugger/tabled_read.{m,inp,exp*}:
Add a polymorphic I/O action primitive, add calls to it, and test
the printing of both monomorphic and polymorphic action goals.
tests/debugger/tabled_read_decl.{m,inp,exp*,data}:
A new test case. It does the same things as the new version of
tabled_read, but it is compiled with --trace-table-io-decl, not
just --trace-table-io. It therefore can (and does) test the printing
of tabled I/O actions.
tests/debugger/Mmakefile:
Add the new test case.
